The Klipsch KPT-1802-HLS cinema subwoofer uses a patented, horn-loaded vented cabinet design with an 18” driver, resulting in class-leading acoustic output combined with commanding sub-20Hz bass response previously unattainable from even a 21” driver configuration system.
The KPT-884-SW is a high output bass-reflex cinema subwoofer that features an advanced low-frequency 4-inch voice coil driver design. Less than 23 inches in depth this system utilizes a single 18-inch driver that gains its high efficiency through the use of large geometrically optimized structures and light-weight cones. In fact the KPT-884-SW is capable of delivering an earth-shaking low frequency of 18Hz.
The KPT-418-SW is a high-output bass-reflex subwoofer system delivers true bottom-end performance along with high power handling capability and high efficiency.
An ideal subwoofer for back-of-house bass reinforcement without taking up valuable seating space, the KPT-684-SW-SMA increases the flexibility of the KPT-684 with the addition of strong, aluminum internal bracing, four main fly points (cabinet top) and safety fly point inserts (both sides) for horizontal suspension.
The KPT-684-SW is a high output bass-reflex subwoofer featuring advanced low-frequency driver design.
The KPT-305 is utilized as a mid-bass device in the 4-way fully horn-loaded KPT-MCM-4-Grand and the KPT-745. It augments the low frequency sections of these speaker systems for effortless, distortion free bass in large auditoriums. It replaces the former KPT-XII.
The Klipsch SB-7 mounting bracket is designed to operate with all Klipsch Cinema Surround speakers with a 2.75” (6.9cm) by 5” (12.7cm) 4-bolt pattern. Vertical tilt angle plus or minus 15°, in 5° increment
Horizontal swivel option plus or minus 45° continuous, right or left of center.
The Klipsch SB-6 mounting bracket is designed to operate with all Klipsch Cinema Surround speakers with a 2.75” (6.9cm) by 5” (12.7cm) 4-bolt pattern.
Vertical tilt angle choices are 0° or 15° downward.
Perfect for a clean look, the Klipsch SB-9 Low Profile Mounting Bracket is ideal for quick and easy installation. The bracket’s installation is designed to allow for single person installation. The SB-9 bracket is only 2 1/4” deep, resulting in a desirable low profile form. The bracket, made using powder coated 12 gauge structural steel, accommodates a 5” x 2.75” standard VESA mounting hole pattern. The SB-9 wall mounting bracket supports KPT series surrounds up to 80lbs (36.4kg).
Package contents include one wall mounting plate, one speaker mounting plate, two security screws and instruction sheet.