This revolutionary kit design incorporates a color-coded mud ring for easy size identification, a breakaway wire tie and multi-position snap fit wings.

The metal wings easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a color-coded mud ring for easy size identification, a breakaway wire tie and multi-position snap fit wings.

The metal wings easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

The KL-6502-THX delivers effortless dynamic range and brings superior sound to larger areas thanks to its highly regarded THX Select2 certification.

It employs dual 5.25-inch woven fiberglass woofers for amazingly accurate sound, as well as a titanium tweeter mated to an exclusive Tractrix® Horn for flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.
   
Furthermore, the KL-6502-THX offers unlimited flexibility. It is timbre matched to all of our THX-certified products, so you can mix and match to create an unbeatable, discreet stereo or home theater system that’s just right for you.

Never before has Klipsch offered such premium performance in an in-wall speaker. You’ll discover it delivers effortless dynamic range and brings superior sound to larger rooms thanks to its highly regarded THX Select2 certification.  

The KL-6504-THX employs four high-output 5.25-inch fiberglass woofers for powerful bass impact, while a 1-inch titanium tweeter mated to a new symmetrical pattern 90 x 90 square Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. This exclusive horn design also allows the speaker to consistently deliver unbeatable sound, whether it’s installed horizontally or vertically.

The KL-6504-THX’s titanium horn-loaded tweeter is mated to the woofers using precision-voiced, high-definition crossover networks, creating high sensitivity. This makes the speaker easier to drive, so it requires a lot less amplification power than conventional designs.

Adding to its first-class sound, the KL-6504-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KL-6504-THX comes with a lot of options. It is timbre matched to all of our THX-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

From multi-room sound to state-of-the-art home theater, Klipsch delivers exciting, high-value audio solutions for every application and lifestyle. And the Synergy Series KHW-5 in-wall loudspeaker helps make it possible. 

The KHW-5 is carefully engineered using the latest technology to deliver superb performance and unparalleled value. It employs a 5.25-inch IMG-cone woofer to create remarkably clean, rich bass and a 1-inch aluminum-dome compression driver tweeter mated to a 5-inch square 90º x 60º Klipsch Tractrix® Horn for high efficiency and extreme reliability.

Because the KHW-5 uses the same technology and design features as the other Synergy products, it is possible to combine this architectural model with the line's standalone speakers and still maintain sonic continuity.

A tweeter attenuation switch conveniently placed behind the grille helps tailor the speaker's output to the acoustics of its environment, and an IR punchout accepts standard infrared receivers. And the speaker's 8-ohm impedance is compatible with all amplifiers.

The KHW-5's white frame and rustproof, powder-coated aluminum grille can be painted to match any wall.

With its superior construction and high-performance components that challenge comparable freestanding speakers, the KHW-5 proves that architectural sound doesn't have to mean compromised sound.

This exceptional speaker employs a 6.5-inch gray polymer woofer cone and 1-inch soft/silk dome tweeter to deliver mind-bending depth and clarity.

Available in a white finish, the R-2650-W can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Featuring a 6.5-inch copper-colored IMG woofer, 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as a treble contour switch, this affordable and dynamic in-wall speaker gives you plenty of bang for your buck. In fact, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-3650-W can be paired with the Klipsch IK-650-W installation kit (sold separately).This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Featuring an 8-inch copper-colored IMG woofer, a 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as a treble contour switch, this dynamic in-wall speaker gives you plenty of bang for your buck and brings high-quality entertainment into your home without taking up valuable floor space. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-3800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By featuring a 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. In fact, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5650-W can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By featuring an 8-inch Cerametallic™ woofer cone, a 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Der R-1650-W verwendet einen Polymer-Konustieftöner (Ø 16,5 cm) und eine große Motorstruktur für hohe Empfindlichkeit und hat eine starke Bassleistung. Ein Polymer-Kalottenhochtöner (Ø 2,54 cm) verteilt glatte, klare Höhen über einen großen Bereich.

Das Befestigungssystem des Lautsprechers erleichtert die Installation, und sein lackierbarer Aluminiumgrill bietet in feuchten Umgebungen wie Badezimmern, Küchen und Saunas Schutz vor Rost.
Der R-1650-W passt in unseren neuesten IK-650-W-Installations-Kit, kann aber auch mit dem Feuerschutz-Lautsprechergehäuse ME-650-W verwendet werden.

The R-2502-W employs dual 5.25-inch polymer woofer cones for accurate sound with dynamic detail, while a silk dome tweeter mated to a symmetrical pattern 90 x 90 conical horn generates flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor. IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers.
   
Furthermore, the R-2502-W offers unlimited flexibility. It is timbre matched to all of our 2000 series architectural products, so you can mix and match to create an affordable, discreet stereo or home theater system that’s just right for you.

The R-5502-W employs dual 5.25-inch Cerametallic woofer cones for fast, accurate sound with dynamic detail, while a titanium tweeter mated to a pivoting Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.

Bass and treble switches with custom EQ settings allow the speaker to be tailored to its environment, while IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers.
   
Furthermore, the R-5502-W offers unlimited flexibility. It is timbre matched to all of our 5000 series architectural products, so you can mix and match to create a high-performance, discreet stereo or home theater system that’s just right for you.