Sub Placement

A. Although Klipsch has provided download files for remote control operation, we do not officially support any remote control issues. Our tech support group has not programmed any learning remotes to function with the RT series; they do, however, provide the IR codes. Any issues that might arise concerning the programming of remotes would be technical support issues for the individual remote control manufacturers.

Codes for the Phillips Pronto, RTI, and Universal Remote controls are not “read text” files. Unless your remote is programmable via PC, it’s unlikely these will be of any use. If your remote is not one of these brands, you should still be able to obtain files to program them. (See below) To use our codes, unzip them to your hard drive and connect the remote via cable to your computer; the codes are downloaded directly into the remote.

For example, to program UEI manufactured remotes, go to http://www.uei.com. Under products, you should see One-For-All, Kameleon and Nevo. The code should work, once you use a standard number code (1991) to program. In theory, after you have a working remote, a learning remote should be able to "learn" the codes from the programmed unit, just as it would for any other remote.

Logitech has the codes for all Harmony remotes for the Klipsch model subs noted below. All Harmony remotes should accept the same programming. Add the device from the Harmony software in the following manner. http://www.logitech.com

Add “Device”, choose “Amplifier”, choose “Amplifier” the second time, choose “Klipsch” from the manufacturers’ listing and type in the model precisely as they are below for the model you own: 

• RW-10d 
• RW-12d 
• RSW-10d 
• RT-10d 
• RT-12d

A.

For most home theater systems, you’ll use a standard RCA connector hookup. This is a shielded wire that is similar in construction to the wires leading from a DVD player to a receiver. It will connect to the single SUB or LFE jack on the back of your receiver and to either of the two inputs on the back of the sub. If you wish, you may obtain a ‘Y’ connector to hook up to both of the sub inputs; this will result in a slight increase in volume.

Cables specifically designed for subwoofer use typically are better shielded than standard ‘patch cables’ and may offer possible noise reduction or cancellation from electrical devices the cable may come in contact with. Some subwoofer cables are directional, (one end always hooks up to receiver, the other to the sub), so always read any instructions that come with your specialty cabling.

A.

Sometimes, adding a second subwoofer can smooth bass response throughout the room. This is due to strong acoustic standing waves in the room which are dependent on the basic room dimensions (height, length, and width) and the placement of the sub and primary listening area. With a single sub, it is possible to obtain strong bass at one spot, with very weak bass elsewhere in the room. You can hear this by carefully listening to bass as you move a few feet in any direction. If you have strong bass/weak bass problems, using a second sub in a different location may reduce the severity of the problem. The important thing to remember is to find what sounds best to you! Each room is different; experiment until you find the placement that produces the most pleasing bass to your ears.

Some people feel they can never have enough bass. So long as they are placed properly, multiple subwoofers typically produce more bass. It is important to note that unless the second subwoofer goes deeper than the first one, adding additional subwoofers will only raise the bass volume—it will not produce deeper base. You’ll need to experiment with different positions (as previously described) to find the best places for two or more subwoofers. Some people use one subwoofer for a certain frequency range and the second for another (such as the LFE channel in 5.1 recordings). Other options are to connect one subwoofer to the front channels and one to the rear channels, or one to the center channel and the other to the remaining channels.

A.

It is generally believed that the bass you hear below approximately 80 Hz is non-directional. This means that you can point the loudspeaker in any direction and the sound will still reach the listener's ears. Since much of the bass that subwoofers produce is below that frequency, you can place the subwoofer almost anywhere in the room. This is the opposite of full-range speakers, which have just a few placement options in a room that allow them to sound good, since they must be positioned for the best combination of imaging and tonal balance. Putting a subwoofer in a corner of the room may cause the sub to sound louder. If your subwoofer is a ported design, keep it at least twice the diameter of the port exit (probably 6-12 inches) away from the nearest wall, so that air flowing out of the port is not obstructed. If the bass seems too boomy, you can fine-tune the sub by moving it farther from the wall until it sounds smooth to your ears.

The best way to find the ideal place for your subwoofer is to hook it up and put it right where you will be sitting in the room. Set the subwoofer to level, low pass and phase. Play something with consistent, deep bass and move around the room on your knees; this way your head is about where it would be when you are seated. The spot where the bass sounds best is a spot where you might put your subwoofer. You may find more than one location.

Corner placement of the subwoofer typically yields the loudest output (highest efficiency). This does not mean that it will always sound best in this position; experimenting with placement is always suggested. It's also important to have the sound from the sub reach the listener in sync with the sound from the main speakers; otherwise the sound may not blend properly. You should not be able to hear your subwoofer as a separate entity—it should seem that your main speakers go deeper with greater impact and authority.