|
Q. Does this decoder support ProLogic II?
|
|
A. No
|
|
|
|
Q. What are the dimensions of this device?
|
|
A. 8.75" wide, 5.5" deep, 2.5" high
|
|
|
|
Q. Which bass management configuration should I use?
|
|
A. Bass management should be turned off with the 5.1 system (all lights red). Klipsch recommends Bass Config.2, C/SW/SL/SR off for the 2.1s and Bass Config.3 C/SW off for the 4.1s.
|
|
|
|
Q. What cables do I need to purchase to use this device?
|
|
A. The only cable you will need is to connect the DD 5.1 to the digital output of your device (optical or coax). The y-adapters to connect to the speakers are included.
|
|
|
|
Q. Will using the DD 5.1 eliminate the need for the control tower of the ProMedia 5.1?
|
|
A. No, you will still need to use the control tower.
|
|
|
|
Q. Can I use this device with a laptop/2 channel soundcard/Macintosh to utilize my 4.1/5.1?
|
|
A. You can use the DD 5.1 in ProLogic Enable mode for any 2-channel source, which will mix that signal into 5 channels.
|
|
|
|
Q. How do I hook up this device to my ProMedia 2.1/4.1?
|
|
A. For the 4.1, you'll simply disable the center channel. For the 2.1, disable the center and surrounds. You will not hook anything up to the center/sub or surround outputs.
|
|
|
|
Q. How do I hook this up to my gaming console/DVD player?
|
|
A. You'll need to purchase an optical or coax cable, depending on the device.
|
|
|
|
Q. How do I hook this up to my soundcard?
|
|
A. You'll need to purchase a cable to run from the coax input of the DD 5.1 to the soundcard's digital output. Most soundcards have an 1/8” miniplug digital out, so you will need to have to appropriate adapter.
|
|
|
|
Q. I only hear sound out of the front two speakers.
|
|
A. If you're listening to a stereo source, the DD 5.1 must be set to ProLogic Enable to hear sound out of all 5 speakers
|
|
|
|
Q. What is the circuit orientation for the three mini plugs?
|
|
A. Tip=Left/Center
Middle=Right/LFE
|
|
|
|
Q. My speakers sound muffled or quiet when playing a DVD. What could be the problem?
|
|
A. Upgrade to the latest version of the DVD software you are using.
|