SF-1 Floorstanding Speaker
The Synergy Series uses advanced technologies in each of its loudspeakers to create a dynamic sound that goes beyond anything listeners could imagine at such reasonable price points. Using the same high-performance materials as its SF-2 predecessor the SF-1 delivers an amazing sound from an even smaller cabinet and even more affordable price.
The SF-1 makes efficient use of a magnetically shielded 6.5-inch graphite-injected woofer and a 1-inch aluminum diaphragm compression driver coupled to a Klipsch 5-inch square Tractrix® Horn creating realistic spatial imaging and smooth uncolored sound reproduction. A large flared port extends the SF-1's deep authoritative bass without turbulence noise or dynamic compression.
Other class-leading design features such as high-definition crossover networks and internally braced enclosures help ensure peak performance from every SF-1 while the unique venting system of its cast-polymer woofer frame cools the voice coil to enhance reliability.
The SF-1's enclosure employs the highest-quality MDF construction and is finished in jet ash vinyl veneer. This floorstander also features a "floating" or suspended grille design which minimizes image-impairing sonic reflections.
The SF-1's surprising high level of smooth and seamless sound reproduction creates a knock-your-socks off experience that will impress your friends and provide years of high-quality audio entertainment.
|SENSITIVITY:||94dB @ 1watt/1meter|
|POWER HANDLING:||100 watts maximum continuous (400 watts peak)|
|NOMINAL IMPEDANCE:||8 ohms|
|TWEETER:||K-101-S 1" (2.54cm) Aluminum dome compression driver|
|HIGH FREQUENCY HORN:||5" square 90(o)x60(o) Tractrix(r) Horn|
|WOOFER:||K-1075-SB 6.5" (16.51cm) IMG cone / cast polymer frame|
|ENCLOSURE MATERIAL:||Medium density fiberboard construction (MDF)|
|ENCLOSURE TYPE:||Bass reflex via rear-mounted port|
|WEIGHT:||33 lbs. (15kg)|
|DIMENSIONS:||33" (83.82cm) x 8" (20.32cm) x 13.6" (34.54cm)|
|FINISHES:||Black ash vinyl veneer|