Designed to fit all Reference Series in-ceiling speakers with 8-inch woofers, the ME-800-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other. 

The ME-800-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards.

The ME-800-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-800-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

Designed to fit all Reference Series in-ceiling speakers with 6.5-inch woofers (except for the square models), the ME-650-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. A flat side with a raised wall allows it to be mounted directly to a joist, making it much easier to align the speakers with other items in the ceiling.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. A flat side with a raised wall allows it to be mounted directly to a joist, making it much easier to align the speakers with other items in the ceiling.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

Our top-of-the-line in-ceiling surround speaker, the KS-7502-THX uses highly respected certification, patented technology and premium materials to deliver compelling audio experiences that are second to none. In fact, most in-ceiling surrounds can’t “fool” listeners into believing the sound is coming from all around them, rather than from above. But that’s not a problem for the KS-7502-THX, as it offers a smooth, seamless broad distribution of sound.

The KS-7502-THX employs dual 5.25-inch Cerametallic woofers that operate in an enclosed tuned-port chamber. These exclusive woofer cones offer superb damping characteristics that will not flex or resonate at frequencies within the drivers’ operating ranges, resulting in consistent bass response regardless of the installation or ceiling air space.

Dual 1-inch titanium horn-loaded tweeters lie in a patented vertically stacked Wide Dispersion Surround Technology array, producing enveloping surround performances and precise localization of individual effects.

Adding to its first-class sound, the KS-7502-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KS-7502-THX comes with a lot of options. It is timbre matched to all of our THX Ultra2-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

Our top-of-the-line in-ceiling LCR speaker, the KL-7502-THX uses highly respected certification, patented technology and premium materials to deliver compelling audio experiences that are second to none. In fact, most in-ceiling speakers can’t “fool” listeners into believing the sound is coming directly at them, rather than from above. But that’s not a problem for the KL-7502-THX, as it offers articulate detail, powerful impact and excellent localization.

The KL-7502-THX employs dual 5.25-inch Cerametallic woofers that operate in an enclosed tuned-port chamber. These exclusive woofer cones offer superb damping characteristics that will not flex or resonate at frequencies within the drivers’ operating ranges, resulting in consistent bass response regardless of the installation or ceiling air space.

A 1-inch titanium tweeter in a patented 60-90-110-degree horn that features Variable Coverage Technology, or VCT, allows the speaker to create precise imaging and localized sound fields.

Adding to its first-class sound, the KL-7502-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KL-7502-THX comes with a lot of options. It is timbre matched to all of our THX Ultra2-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

Constructed on a rigid, low-resonance cast-polymer frame, the two-way KHC-6 delivers notably robust bass from its 6.5-inch IMG-cone woofer. Its coaxially mounted 1-inch aluminum-dome compression driver tweeter is mated to a 100º Klipsch Tractrix® Horn that can be swiveled to focus the sound where needed. A tweeter attenuation switch conveniently placed behind the grille provides another tool for tailoring the speaker's output to the acoustics of the environment.

And while the KHC looks very different, its drivers sonically match the freestanding models in the Synergy Series line, producing the same wide dynamic, low distortion performances.

The KHC's white frame and rustproof, powder-coated aluminum grille can be painted to match the ceiling. Mid-sized among the in-ceiling models, the versatile, easy-to-install KHC-6 is an excellent choice for distributed-music systems and other applications requiring unobtrusive, high-quality loudspeakers.

Great sound, easy installation and outstanding reliability make the KHC-6 one of the best values in architectural audio.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-3650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-3650-C features a 1-inch aluminum tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch copper-colored IMG woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Because of its other professional grade features, such as a premium network and treble contour switch, the CDT-3650-C steers clear of the design shortcuts and sonic compromises that plague competing designs.

Available in a white finish, the paintable CDT-3650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-3800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-3800-C features a 1-inch aluminum tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch copper-colored IMG woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble contour switch, give the CDT-3800-C an edge that will exceed your expectations.

Available in a white finish, the paintable CDT-3800-C can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Featuring the same drive components as its round counterpart, the two-way R-2650-C2 employs a 6.5-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter for superior depth and clarity.

Available in a white finish, the R-2650-C2 is paintable and can be paired with the Klipsch IK-650-C2 installation kit (sold separately). This kit design incorporates a mud ring, breakaway tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By adding the affordable R-2650-C2 to its high-end, easy-to-install architectural series, Klipsch proves it now has a speaker for every application and lifestyle

Offering the same technology and performance as the company's round in-ceiling speakers, the two-way R-5650-C2 features a light-weight, well-damped 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn as well as treble and bass contour switches for smooth and refined sound.

Because the swiveling horn allows installers to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area, creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5650-C2 is paintable and can be paired with the Klipsch IK-650-C2 installation kit (sold separately). This kit design incorporates a mud ring, breakaway tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By adding this square flush-mount speaker to its high-end, easy-to-install architectural series, Klipsch proves it now has a product for every application and lifestyle.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

 *This kit is NOT plenum rated.

The R-1650-C employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity. A coaxially mounted 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-C will fit into our latest IK-650-C installation kit, it can also be used in conjunction with the ME-650-C fire-rated enclosure.

The R-1650-CSM employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity and strong bass output. Dual voice coils sum the low frequencies from a stereo input to mono. Upper frequencies are handled individually for the two channels by a coaxially mounted dual-tweeter array, preserving the stereo effect. 

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-CSM will fit into our latest IK-650-C installation kit, it can also be used in conjunction with the ME-650-C fire-rated enclosure.

The RW-5101-C proves that domestic harmony and powerful home theater performance can co-exist. In other words, just because you can’t see this in-ceiling subwoofer, doesn’t mean you won’t feel it. This hard-hitter generates clean, potent bass that’ll lift you out of your seat. It also continues the Klipsch tradition of high output with low distortion and effortless dynamic range.

The RW-5101-C utilizes a 10-inch long-throw woofer for unbeatable music and movie playback and high power handling (250 watts). The driver features a stiff, well-damped Cerametallic cone, a specially treated aluminum that has been electrochemically transformed into ceramic on both outer surfaces. This ceramic compound allows the woofer to move at high speeds without blurring the sound. Furthermore, the subwoofer features an MDF baffle and sealed back enclosure, allowing it to deliver consistent low-frequency response regardless of the ceiling space.

Easy-to-install, the RW-5101-C can accommodate new or existing ceiling structures, as the enclosure is designed to fit standard ceiling joists. It employs all-new sure-grip mounting dogs for even pressure against the drywall. These robust dogs pull tight, leaving no gaps in sight and providing long-term installation reliability.

Timbre and style matched to all of our other premium in-ceiling products, the RW-5101-C brings a great bottom-end to a wide variety of discreet stereo or home theater systems. In fact, we’ve got premium architectural solutions in all shapes, sizes and prices, so take your pick! 

 *The RW-5101-C must be used in conjunction with the company’s RSA-500 subwoofer amplifier, sold separately. Two of these subwoofers can be connected to a single amplifier.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

Designed to fit all Reference Series in-wall speakers with 6.5-inch woofers, the ME-650-W allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-W is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-W fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-W's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

The R-1800-C employs an 8-inch polymer-cone woofer and a large motor structure for high sensitivity. A coaxially mounted 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1800-C will fit into our latest IK-800-C installation kit, it can also be used in conjunction with the ME-800-C fire-rated enclosure.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-5800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-5800-C features a 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch Cerametallic™ woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble and bass contour switches, help the CDT-5800-C establish a new benchmark in architectural audio excellence.

Available in a white finish, the paintable CDT-5800-C can be paired with a Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The affordable Klipsch R-2800-C makes discrete audio a convincing reality for almost anyone. Upholding the same high-performance standards as all Klipsch products, this in-ceiling loudspeaker employs an 8-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter to deliver superior and seamless sound.

Available in a white finish, this speaker can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

This no-comprise, yet affordable, speaker employs a 6.5-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter to deliver mind-bending depth and clarity.

Available in a white finish, this speaker can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

With Klipsch's new R-2800-CSM in-ceiling loudspeaker, affordable architectural audio has never sounded so good. Upholding the same high-performance standards as all Klipsch products, this summed mono model employs an 8-inch gray polymer woofer cone and dual 1-inch soft/silk dome tweeters so that it can play both left and right stereo signals with total precision and clarity. 

Available in a white finish, this speaker can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Most distributed audio systems are plagued with thin-sounding performances, but the new IC-8T-SW in-ceiling subwoofer changes everything. Engineered for music reinforcement applications, these unobtrusive, easy-to-install loudspeakers feature a transformer-less design for 70.7V/100V distributed-line systems. Since transformers severely limit a subwoofer's capabilities, this unique design is the perfect solution when building a great sounding commercial system. 

The IC-8T-SW adds more dimension to any in-ceiling configuration by using an 8-inch woofer, 8-inch drone, polypropylene cones and high-temperature voice coils in the woofer. While most subwoofers use a port to increase output, the IC-8T-SW employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and minimizes turbulence that is often present in ported designs. Maximum continuous output is a remarkable 111dB. And since AES rated sensitivity is 92dB, adequate levels can be achieved with modest amplifier power using the IC-8T-SW. 

Other key features of the IC-8T-SW include the ability to easily switch from low impedance to high impedance distributed-line applications as well as mono and two-channel inputs in low impedance modes. This durable subwoofer has an ABS plastic baffle, formed steel back can and a four-point terminal strip input connector. The IC-8T-SW is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 061347) is also available for drywall ceiling installations.

Upholding the same high-performance standards as all Klipsch products, this reasonably priced speaker employs a 6.5-inch gray polymer woofer cone and dual 1-inch soft/silk dome tweeters so that it can play both left and right stereo signals with total precision and clarity.

Because it nicely blends in with its surroundings and offers installation flexibility, this amazing performer is sure to be a homeowner and residential contractor favorite.

Available in a white finish, the R-2650-CSM can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-2650-C features a 1-inch silk tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch polymer woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Available in a white finish, the paintable CDT-2650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-2800-C features a 1-inch silk tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch polymer woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Available in a white finish, the paintable CDT-2800-C can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-5650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-5650-C features a 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch Cerametallic™ woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble and bass contour switches, give the CDT-5650-C an edge that will exceed your expectations.

Available in a white finish, the paintable CDT-5650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2650-SC can be directed towards the listening area.

The CDT-2650-SC features dual 0.75-inch silk tweeters angled opposite one another. The speaker's 6.5-inch polymer woofer can rotate a full 360 degrees and then shift 15 degrees in any direction.

In order to deliver both rich, immersion surround sound and precise localization of individual effects, the CDT-2650-SC features Klipsch's Wide Dispersion Surround Technology™ (WDST). Careful alignment of two silk tweeters, angled opposite one another, yields an exceptionally wide dispersion pattern, delivering a smooth, broad distribution of sound ideal for every surround-sound format and for music as well as movies.

Available in a white finish, the paintable CDT-2650-SC can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The KL-6502-THX delivers effortless dynamic range and brings superior sound to larger areas thanks to its highly regarded THX Select2 certification.

It employs dual 5.25-inch woven fiberglass woofers for amazingly accurate sound, as well as a titanium tweeter mated to an exclusive Tractrix® Horn for flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.
   
Furthermore, the KL-6502-THX offers unlimited flexibility. It is timbre matched to all of our THX-certified products, so you can mix and match to create an unbeatable, discreet stereo or home theater system that’s just right for you.

Because of its THX® Ultra2 certification, the KL-7800-THX works well with multi-channel movie and music presentations playing up to reference levels in rooms of 3,000 cubic feet or larger.

The KL-7800-THX is also capable of delivering the same high-output, low distortion signature sound as its traditional enclosure counterpart, the KL-525-THX. It employs an 8-inch aluminum woofer and a 1-inch titanium dome compression driver mated to a Tractrix® Horn. This advanced horn design dramatically increases efficiency and allows the speaker to produce more output using less energy.

Featuring an integrated back box enclosure, the KL-7800-THX's response is both predictable and repeatable. Because this enclosure fits easily within the loudspeaker's footprint, the KL-7800-THX can be installed into new or existing construction.

Combine this dynamic loudspeaker with Klipsch's KS-7800-THX in-wall surround, KW-120-THX subwoofer and KA-1000-THX subwoofer amplifier to create a variety of THX Ultra2 in-wall system configurations. The KL-7800-THX can also be mixed and matched with the Klipsch THX Ultra2 traditional box products.

The IK-802-W installation kit offers increased mounting flexibility for our THX® Ultra2 in-wall speakers and RW-5802 in-wall subwoofer.

This revolutionary kit design incorporates a color-coded mud ring for easy size identification, a breakaway wire tie and multi-position snap fit wings.

The metal wings easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

Because of its THX® Ultra2 certification, the KS-7800-THX works well with movie presentations playing up to reference levels in rooms of 3,000 cubic feet or larger. 

The KS-7800-THX is also capable of delivering the same high-output, low distortion signature sound as its traditional enclosure counterpart, the KS-525-THX. It employs an 8-inch aluminum woofer and a patented horn array, consisting of two vertically-stacked Tractrix Horn-loaded tweeters.

In order to create enveloping sound fields and precise localization of individual effects, this speaker also utilizes Klipsch's Wide Dispersion Surround Technology™. Also referred to as WDST, this no-compromise approach gives the KS-7800-THX much more placement flexibility than conventional designs. 

Featuring an integrated back box enclosure, the KS-7800-THX's response is both predictable and repeatable. Because this enclosure fits easily within the loudspeaker's footprint, the KS-7800-THX can be installed into new or existing construction. 

Combine this dynamic loudspeaker with Klipsch's KL-7800-THX LCR speaker, KW-120-THX subwoofer and KA-1000-THX subwoofer amplifier to create a variety of THX Ultra2 in-wall system configurations. The KS-7800-THX can also be mixed and matched with the Klipsch THX Ultra2 traditional box products.

From multi-room sound to state-of-the-art home theater, Klipsch delivers exciting, high-value audio solutions for every application and lifestyle. And the Synergy Series KHW-5 in-wall loudspeaker helps make it possible. 

The KHW-5 is carefully engineered using the latest technology to deliver superb performance and unparalleled value. It employs a 5.25-inch IMG-cone woofer to create remarkably clean, rich bass and a 1-inch aluminum-dome compression driver tweeter mated to a 5-inch square 90º x 60º Klipsch Tractrix® Horn for high efficiency and extreme reliability.

Because the KHW-5 uses the same technology and design features as the other Synergy products, it is possible to combine this architectural model with the line's standalone speakers and still maintain sonic continuity.

A tweeter attenuation switch conveniently placed behind the grille helps tailor the speaker's output to the acoustics of its environment, and an IR punchout accepts standard infrared receivers. And the speaker's 8-ohm impedance is compatible with all amplifiers.

The KHW-5's white frame and rustproof, powder-coated aluminum grille can be painted to match any wall.

With its superior construction and high-performance components that challenge comparable freestanding speakers, the KHW-5 proves that architectural sound doesn't have to mean compromised sound.

Never before has Klipsch offered such premium performance in an in-wall speaker. You’ll discover it delivers effortless dynamic range and brings superior sound to larger rooms thanks to its highly regarded THX Select2 certification.  

The KL-6504-THX employs four high-output 5.25-inch fiberglass woofers for powerful bass impact, while a 1-inch titanium tweeter mated to a new symmetrical pattern 90 x 90 square Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. This exclusive horn design also allows the speaker to consistently deliver unbeatable sound, whether it’s installed horizontally or vertically.

The KL-6504-THX’s titanium horn-loaded tweeter is mated to the woofers using precision-voiced, high-definition crossover networks, creating high sensitivity. This makes the speaker easier to drive, so it requires a lot less amplification power than conventional designs.

Adding to its first-class sound, the KL-6504-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KL-6504-THX comes with a lot of options. It is timbre matched to all of our THX-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

Featuring a 6.5-inch copper-colored IMG woofer, 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as a treble contour switch, this affordable and dynamic in-wall speaker gives you plenty of bang for your buck. In fact, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-3650-W can be paired with the Klipsch IK-650-W installation kit (sold separately).This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The R-2502-W employs dual 5.25-inch polymer woofer cones for accurate sound with dynamic detail, while a silk dome tweeter mated to a symmetrical pattern 90 x 90 conical horn generates flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor. IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers.
   
Furthermore, the R-2502-W offers unlimited flexibility. It is timbre matched to all of our 2000 series architectural products, so you can mix and match to create an affordable, discreet stereo or home theater system that’s just right for you.

By featuring an 8-inch Cerametallic™ woofer cone, a 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The R-5502-W employs dual 5.25-inch Cerametallic woofer cones for fast, accurate sound with dynamic detail, while a titanium tweeter mated to a pivoting Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.

Bass and treble switches with custom EQ settings allow the speaker to be tailored to its environment, while IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers.
   
Furthermore, the R-5502-W offers unlimited flexibility. It is timbre matched to all of our 5000 series architectural products, so you can mix and match to create a high-performance, discreet stereo or home theater system that’s just right for you.

Featuring an 8-inch copper-colored IMG woofer, a 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as a treble contour switch, this dynamic in-wall speaker gives you plenty of bang for your buck and brings high-quality entertainment into your home without taking up valuable floor space. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-3800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By featuring a 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. In fact, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5650-W can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack.

To keep end users from inadvertently tampering with performance levels, the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system.

Designed specifically for surround use in home theater applications, the R-5650-S employs a 6.5-inch Cerametallic™ woofer and dual 1-inch titanium compression drivers. Because of its patented horn array, which is two vertically stacked Tractrix® Horn-loaded tweeters pointing in opposite directions, the R-5650-S outperforms conventional designs by maximizing diffusion, clarity and efficiency, while minimizing room interactions that blur sonic detail.

The R-5650-S draws listeners into the middle of the action through the use of Klipsch's proprietary Wide Dispersion Surround Technology or WDST™. The careful alignment of the two controlled-directivity Tractrix Horn tweeters, angled opposite of one another, yields an incredibly wide dispersion pattern.

Able to function in any standard wall, ceiling or drop ceiling, the R-5650-S can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The R-1650-W employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity and strong bass output. A 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-W will fit into our latest IK-650-W installation kit, it can also be used in conjunction with the ME-650-W fire-rated enclosure.

Fitting standard 2- by 4-inch construction, the easy-to-install RW-5802 can accommodate any new or existing structure with a minimum 0.5-inch dry wall surface. Because it features an MDF baffle with a reinforced composite sealed enclosure, this high-powered, passive module subwoofer provides guaranteed performance and minimizes sound transfer into adjacent rooms.

The RW-5802 gets its deep-driving bass courtesy of dual 8-inch long-throw woofers. These exclusive drivers feature stiff, well-damped Cerametallic™ cones, a specially treated aluminum that has been anodized, or electrochemically transformed into ceramic on both outer surfaces. Second only to diamond in strength, this ceramic compound allows the woofers to move at high speeds without blurring the sound like conventional designs.

Designed to power the RW-5802, the RSA-500 amplifier will drive up to two subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for quick and easy installation.

*While the RW-5802 in-wall subwoofer and RSA-500 subwoofer amplifier are sold separately, they must be used in conjunction with one another. 
 

This exceptional speaker employs a 6.5-inch gray polymer woofer cone and 1-inch soft/silk dome tweeter to deliver mind-bending depth and clarity.

Available in a white finish, the R-2650-W can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.