This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. A flat side with a raised wall allows it to be mounted directly to a joist, making it much easier to align the speakers with other items in the ceiling.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. A flat side with a raised wall allows it to be mounted directly to a joist, making it much easier to align the speakers with other items in the ceiling.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. A flat side with a raised wall allows it to be mounted directly to a joist, making it much easier to align the speakers with other items in the ceiling.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

Constructed on a rigid, low-resonance cast-polymer frame, the two-way KHC-6 delivers notably robust bass from its 6.5-inch IMG-cone woofer. Its coaxially mounted 1-inch aluminum-dome compression driver tweeter is mated to a 100º Klipsch Tractrix® Horn that can be swiveled to focus the sound where needed. A tweeter attenuation switch conveniently placed behind the grille provides another tool for tailoring the speaker's output to the acoustics of the environment.

And while the KHC looks very different, its drivers sonically match the freestanding models in the Synergy Series line, producing the same wide dynamic, low distortion performances.

The KHC's white frame and rustproof, powder-coated aluminum grille can be painted to match the ceiling. Mid-sized among the in-ceiling models, the versatile, easy-to-install KHC-6 is an excellent choice for distributed-music systems and other applications requiring unobtrusive, high-quality loudspeakers.

Great sound, easy installation and outstanding reliability make the KHC-6 one of the best values in architectural audio.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-3800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-3800-C features a 1-inch aluminum tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch copper-colored IMG woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble contour switch, give the CDT-3800-C an edge that will exceed your expectations.

Available in a white finish, the paintable CDT-3800-C can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Featuring the same drive components as its round counterpart, the two-way R-2650-C2 employs a 6.5-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter for superior depth and clarity.

Available in a white finish, the R-2650-C2 is paintable and can be paired with the Klipsch IK-650-C2 installation kit (sold separately). This kit design incorporates a mud ring, breakaway tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By adding the affordable R-2650-C2 to its high-end, easy-to-install architectural series, Klipsch proves it now has a speaker for every application and lifestyle

Offering the same technology and performance as the company's round in-ceiling speakers, the two-way R-5650-C2 features a light-weight, well-damped 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn as well as treble and bass contour switches for smooth and refined sound.

Because the swiveling horn allows installers to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area, creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5650-C2 is paintable and can be paired with the Klipsch IK-650-C2 installation kit (sold separately). This kit design incorporates a mud ring, breakaway tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By adding this square flush-mount speaker to its high-end, easy-to-install architectural series, Klipsch proves it now has a product for every application and lifestyle.

Upholding the same high-performance standards as all Klipsch products, this reasonably priced speaker employs a 6.5-inch gray polymer woofer cone and dual 1-inch soft/silk dome tweeters so that it can play both left and right stereo signals with total precision and clarity.

Because it nicely blends in with its surroundings and offers installation flexibility, this amazing performer is sure to be a homeowner and residential contractor favorite.

Available in a white finish, the R-2650-CSM can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

This no-comprise, yet affordable, speaker employs a 6.5-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter to deliver mind-bending depth and clarity.

Available in a white finish, this speaker can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

With Klipsch's new R-2800-CSM in-ceiling loudspeaker, affordable architectural audio has never sounded so good. Upholding the same high-performance standards as all Klipsch products, this summed mono model employs an 8-inch gray polymer woofer cone and dual 1-inch soft/silk dome tweeters so that it can play both left and right stereo signals with total precision and clarity. 

Available in a white finish, this speaker can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2650-SC can be directed towards the listening area.

The CDT-2650-SC features dual 0.75-inch silk tweeters angled opposite one another. The speaker's 6.5-inch polymer woofer can rotate a full 360 degrees and then shift 15 degrees in any direction.

In order to deliver both rich, immersion surround sound and precise localization of individual effects, the CDT-2650-SC features Klipsch's Wide Dispersion Surround Technology™ (WDST). Careful alignment of two silk tweeters, angled opposite one another, yields an exceptionally wide dispersion pattern, delivering a smooth, broad distribution of sound ideal for every surround-sound format and for music as well as movies.

Available in a white finish, the paintable CDT-2650-SC can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-2650-C features a 1-inch silk tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch polymer woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Available in a white finish, the paintable CDT-2650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-2800-C features a 1-inch silk tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch polymer woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Available in a white finish, the paintable CDT-2800-C can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The affordable Klipsch R-2800-C makes discrete audio a convincing reality for almost anyone. Upholding the same high-performance standards as all Klipsch products, this in-ceiling loudspeaker employs an 8-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter to deliver superior and seamless sound.

Available in a white finish, this speaker can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-3650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-3650-C features a 1-inch aluminum tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch copper-colored IMG woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Because of its other professional grade features, such as a premium network and treble contour switch, the CDT-3650-C steers clear of the design shortcuts and sonic compromises that plague competing designs.

Available in a white finish, the paintable CDT-3650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-5800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-5800-C features a 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch Cerametallic™ woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble and bass contour switches, help the CDT-5800-C establish a new benchmark in architectural audio excellence.

Available in a white finish, the paintable CDT-5800-C can be paired with a Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-5650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-5650-C features a 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch Cerametallic™ woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble and bass contour switches, give the CDT-5650-C an edge that will exceed your expectations.

Available in a white finish, the paintable CDT-5650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Designed to fit all Reference Series in-ceiling speakers with 8-inch woofers, the ME-800-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other. 

The ME-800-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards.

The ME-800-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-800-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

The R-1650-C employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity. A coaxially mounted 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-C will fit into our latest IK-650-C installation kit, it can also be used in conjunction with the ME-650-C fire-rated enclosure.

Designed to fit all Reference Series in-ceiling speakers with 6.5-inch woofers (except for the square models), the ME-650-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

The R-1800-C employs an 8-inch polymer-cone woofer and a large motor structure for high sensitivity. A coaxially mounted 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1800-C will fit into our latest IK-800-C installation kit, it can also be used in conjunction with the ME-800-C fire-rated enclosure.

The RW-5101-C proves that domestic harmony and powerful home theater performance can co-exist. In other words, just because you can’t see this in-ceiling subwoofer, doesn’t mean you won’t feel it. This hard-hitter generates clean, potent bass that’ll lift you out of your seat. It also continues the Klipsch tradition of high output with low distortion and effortless dynamic range.

The RW-5101-C utilizes a 10-inch long-throw woofer for unbeatable music and movie playback and high power handling (250 watts). The driver features a stiff, well-damped Cerametallic cone, a specially treated aluminum that has been electrochemically transformed into ceramic on both outer surfaces. This ceramic compound allows the woofer to move at high speeds without blurring the sound. Furthermore, the subwoofer features an MDF baffle and sealed back enclosure, allowing it to deliver consistent low-frequency response regardless of the ceiling space.

Easy-to-install, the RW-5101-C can accommodate new or existing ceiling structures, as the enclosure is designed to fit standard ceiling joists. It employs all-new sure-grip mounting dogs for even pressure against the drywall. These robust dogs pull tight, leaving no gaps in sight and providing long-term installation reliability.

Timbre and style matched to all of our other premium in-ceiling products, the RW-5101-C brings a great bottom-end to a wide variety of discreet stereo or home theater systems. In fact, we’ve got premium architectural solutions in all shapes, sizes and prices, so take your pick! 

 *The RW-5101-C must be used in conjunction with the company’s RSA-500 subwoofer amplifier, sold separately. Two of these subwoofers can be connected to a single amplifier.

The R-1650-CSM employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity and strong bass output. Dual voice coils sum the low frequencies from a stereo input to mono. Upper frequencies are handled individually for the two channels by a coaxially mounted dual-tweeter array, preserving the stereo effect. 

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-CSM will fit into our latest IK-650-C installation kit, it can also be used in conjunction with the ME-650-C fire-rated enclosure.

Because of its THX® Ultra2 certification, the KL-7800-THX works well with multi-channel movie and music presentations playing up to reference levels in rooms of 3,000 cubic feet or larger.

The KL-7800-THX is also capable of delivering the same high-output, low distortion signature sound as its traditional enclosure counterpart, the KL-525-THX. It employs an 8-inch aluminum woofer and a 1-inch titanium dome compression driver mated to a Tractrix® Horn. This advanced horn design dramatically increases efficiency and allows the speaker to produce more output using less energy.

Featuring an integrated back box enclosure, the KL-7800-THX's response is both predictable and repeatable. Because this enclosure fits easily within the loudspeaker's footprint, the KL-7800-THX can be installed into new or existing construction.

Combine this dynamic loudspeaker with Klipsch's KS-7800-THX in-wall surround, KW-120-THX subwoofer and KA-1000-THX subwoofer amplifier to create a variety of THX Ultra2 in-wall system configurations. The KL-7800-THX can also be mixed and matched with the Klipsch THX Ultra2 traditional box products.

The IK-802-W installation kit offers increased mounting flexibility for our THX® Ultra2 in-wall speakers and RW-5802 in-wall subwoofer.

This revolutionary kit design incorporates a color-coded mud ring for easy size identification, a breakaway wire tie and multi-position snap fit wings.

The metal wings easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

 *This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This exceptional speaker employs a 6.5-inch gray polymer woofer cone and 1-inch soft/silk dome tweeter to deliver mind-bending depth and clarity.

Available in a white finish, the R-2650-W can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By featuring an 8-inch Cerametallic™ woofer cone, a 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Featuring an 8-inch copper-colored IMG woofer, a 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as a treble contour switch, this dynamic in-wall speaker gives you plenty of bang for your buck and brings high-quality entertainment into your home without taking up valuable floor space. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-3800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Featuring a 6.5-inch copper-colored IMG woofer, 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as a treble contour switch, this affordable and dynamic in-wall speaker gives you plenty of bang for your buck. In fact, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-3650-W can be paired with the Klipsch IK-650-W installation kit (sold separately).This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By featuring a 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. In fact, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5650-W can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

From multi-room sound to state-of-the-art home theater, Klipsch delivers exciting, high-value audio solutions for every application and lifestyle. And the Synergy Series KHW-5 in-wall loudspeaker helps make it possible. 

The KHW-5 is carefully engineered using the latest technology to deliver superb performance and unparalleled value. It employs a 5.25-inch IMG-cone woofer to create remarkably clean, rich bass and a 1-inch aluminum-dome compression driver tweeter mated to a 5-inch square 90º x 60º Klipsch Tractrix® Horn for high efficiency and extreme reliability.

Because the KHW-5 uses the same technology and design features as the other Synergy products, it is possible to combine this architectural model with the line's standalone speakers and still maintain sonic continuity.

A tweeter attenuation switch conveniently placed behind the grille helps tailor the speaker's output to the acoustics of its environment, and an IR punchout accepts standard infrared receivers. And the speaker's 8-ohm impedance is compatible with all amplifiers.

The KHW-5's white frame and rustproof, powder-coated aluminum grille can be painted to match any wall.

With its superior construction and high-performance components that challenge comparable freestanding speakers, the KHW-5 proves that architectural sound doesn't have to mean compromised sound.

The R-1650-W employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity and strong bass output. A 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-W will fit into our latest IK-650-W installation kit, it can also be used in conjunction with the ME-650-W fire-rated enclosure.

Designed to fit all Reference Series in-wall speakers with 6.5-inch woofers, the ME-650-W allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-W is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-W fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-W's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

Fitting standard 2- by 4-inch construction, the easy-to-install RW-5802 can accommodate any new or existing structure with a minimum 0.5-inch dry wall surface. Because it features an MDF baffle with a reinforced composite sealed enclosure, this high-powered, passive module subwoofer provides guaranteed performance and minimizes sound transfer into adjacent rooms.

The RW-5802 gets its deep-driving bass courtesy of dual 8-inch long-throw woofers. These exclusive drivers feature stiff, well-damped Cerametallic™ cones, a specially treated aluminum that has been anodized, or electrochemically transformed into ceramic on both outer surfaces. Second only to diamond in strength, this ceramic compound allows the woofers to move at high speeds without blurring the sound like conventional designs.

Designed to power the RW-5802, the RSA-500 amplifier will drive up to two subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for quick and easy installation.

*While the RW-5802 in-wall subwoofer and RSA-500 subwoofer amplifier are sold separately, they must be used in conjunction with one another. 
 

This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack.

To keep end users from inadvertently tampering with performance levels, the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system.

Available in black or white, this paintable kit is both rugged and flexible. It comes with a pole mount plate, two adjustable metal straps and an adjustable arm mount. This unique mounting solution also allows installers to effortlessly modify the direction of the speaker, which is a must for outside applications.

For over 60 years, we’ve been about no-compromise audio performance and our rock speaker is no exception. Just listen and you’ll discover that it delivers an amazing, full-bodied bass response for its price range.

The AWR-650-SM is a true two-way design that employs a 6.5-inch dual voice coil polymer woofer and dual ¾-inch polymer dome tweeters. 

The speaker’s dual tweeter design allows it to play both left and right stereo signals with precision and clarity. Additionally, it can be wired for mono output in instances where several models are needed to bring smooth and even coverage to larger areas.    

Available in a granite, sandstone or red rock finish, the AWR-650-SM features a durable UV-resistant enclosure so you can enjoy clean, clear sound all season long.

Building on the success of our popular CA-SW-8T model, the new CA-800-TSW version features enhanced cosmetics, added mounting flexibility and even better performance.

The re-voiced CA-800-TSW shakes things up and delivers a deep, driving sound through an 8-inch, long excursion driver that has a high-temperature voice coil attached to an IMG cone that is light weight and offers excellent rigidity and water resistance.

Available in black or white, this model has a durable UV-resistant all-weather enclosure and internal multi-tap transformer that allows 70-volt, 100-volt or pass through 6 ohm operation. It also features a re-designed grille that stays securely fastened and incorporates a new paint formulation for increased weather resistance and years of maintenance-free protection regardless of the climate or environment.

The included heavy gauge zinc C-bracket provides added mounting strength. It attaches to the enclosure's integral "center-of-gravity balanced" threaded studs that are positioned inside the speaker and to the oversized knobs, ensuring positive position-lock.

The CA-800-TSW's improved input cup allows for easier drainage and the added 3/8"-16 threaded inserts for use with optional mounts offers better placement flexibility.

The Klipsch AW-650 all-weather loudspeaker was designed for customers who expect great sound in the great outdoors. Upholding the same high-quality standards as our indoor products, this full-range model delivers a level of performance that's like nothing you've heard in an outdoor speaker before.

Featuring a 6.5-inch IMG woofer, 1-inch titanium dome tweeter mated to a square Tractrix® Horn, durable UV-resistant enclosure, non-corrosive grille, easy draining input cup, heavy gauge zinc C-bracket and 3/8"-16 threaded inserts, the AW-650 can be mounted almost anywhere and still deliver clean, clear and dynamic performances. 

Available in white or black finish.

With its UV-resistant ABS enclosure and stainless steel grille and hardware, the KHO-7 is designed to perform consistently under the harshest of conditions.

The KHO-7 produces lifelike sound through its 5.25-inch poly cone woofer and a 1-inch silk dome compression driver tweeter loaded with an exclusive Klipsch 90º x 40º Tractrix® Horn. This advanced horn design dramatically increases efficiency and allows the loudspeaker to produce more output using less energy.

Available in a white finish, the paintable KHO-7 comes with a C-style mounting bracket and port plug, making installation quick and simple. And its 8-ohm impedance is compatible with all amplifiers.

When it comes to an all-weather loudspeaker no quality is more respected and more desired than durability so look no further than the KHO-7.

Upholding the same high-performance standards as all our indoor products, the AW-500-SM employs a 5-inch IMG woofer and dual 1-inch titanium dome tweeters so that it can play both left and right stereo signals with total precision and clarity.

Perfect for small outdoor areas that cannot accommodate multiple speakers, the AW-500-SM can also bring smooth and even coverage to larger areas when combined with several other identical models.

Other professional-grade features on the AW-500-SM include a switch that lets listeners easily select between mono and stereo configurations, durable UV-resistant enclosure, heavy gauge zinc C-bracket for added mounting strength and 3/8"-16 threaded inserts that fit popular third party mounts, making installation quick and simple. 

Because it nicely blends in with its surroundings and offers installation flexibility, this amazing performer is sure to be a homeowner favorite.

Featuring a 4-inch IMG woofer, 1-inch polymer tweeter mated to a square Tractrix® Horn, durable UV-resistant enclosure, non-corrosive grille, easy draining input cup, heavy gauge zinc C-bracket and 3/8"-16 threaded inserts, the AW-400 easily brings high-quality music entertainment to your patio, garden, terrace, balcony or pool side.

With its good looks, great performance value and installation flexibility, the AW-400 will change the way you think about architectural audio.

Featuring a 5-inch IMG woofer, 1-inch polymer tweeter mated to a square Tractrix® Horn, durable UV-resistant enclosure, non-corrosive grille, easy draining input cup, heavy gauge zinc C-bracket and 3/8"-16 threaded inserts, the AW-500 easily brings high-quality music entertainment to your patio, garden, terrace, balcony or pool side.

Because it nicely blends in with its surroundings and offers installation flexibility, this amazing performer is sure to be a homeowner favorite.

Featuring a 5.25-inch IMG woofer, 1-inch titanium dome tweeter mated to a square Tractrix® Horn, durable UV-resistant enclosure, non-corrosive grille, easy draining input cup, heavy gauge zinc C-bracket and 3/8"-16 threaded inserts, the AW-525 easily creates the ultimate outdoor sound experience.

Regardless of what Mother Nature throws its way, the AW-525 will continue to deliver big time sound and worry-free performances.

Available in white or black finish.

As the larger of the two LCR speakers in the Ultra2 family, the KL-650-THX features a front-firing port for low bass extension, dual 6.5-inch Cerametallic™ woofers and a new 6- by 10-inch Tractrix® Horn Tweeter. The tweeter driver is a 1-inch titanium-dome compression unit designed specifically for use with horns to provide high output with low distortion. The clarity and distinction of this LCR can also be attributed to its top-of-the-line internal wiring.

The KL-650-THX enclosure has the same dado and rabbet construction used in Klipsch professional speakers ensuring cabinet integrity in suspended applications. The Omni-Mount suspension points on this loudspeaker facilitate wall or ceiling mounting using standard hardware.

Available in a custom Galaxy black finish with an aluminum fascia, the KL-650-THX delivers the ultimate in power, detail and emotional impact from durable, easy-to-install cabinets.

As the smaller of the two LCR speakers in the Ultra2 family, the highly efficient KL-525-THX features a sealed enclosure, top-of-the-line internal wiring, dual 5.25-inch Cerametallic™ woofers and a 1-inch titanium diaphragm compression driver coupled to a 6- by 10-inch Tractrix® Horn.

The KL-525-THX enclosure has the same dado and rabbet construction used in Klipsch professional speakers ensuring cabinet integrity in suspended applications. The Omni-Mount suspension points on this loudspeaker facilitate wall or ceiling mounting using standard hardware.

Available in a custom Galaxy black finish with an aluminum fascia, the KL-525-THX delivers dynamic audio experiences that draw listeners into the middle of live concerts and action packed movies.

Our top-of-the-line in-ceiling LCR speaker, the KL-7502-THX uses highly respected certification, patented technology and premium materials to deliver compelling audio experiences that are second to none. In fact, most in-ceiling speakers can’t “fool” listeners into believing the sound is coming directly at them, rather than from above. But that’s not a problem for the KL-7502-THX, as it offers articulate detail, powerful impact and excellent localization.

The KL-7502-THX employs dual 5.25-inch Cerametallic woofers that operate in an enclosed tuned-port chamber. These exclusive woofer cones offer superb damping characteristics that will not flex or resonate at frequencies within the drivers’ operating ranges, resulting in consistent bass response regardless of the installation or ceiling air space.

A 1-inch titanium tweeter in a patented 60-90-110-degree horn that features Variable Coverage Technology, or VCT, allows the speaker to create precise imaging and localized sound fields.

Adding to its first-class sound, the KL-7502-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KL-7502-THX comes with a lot of options. It is timbre matched to all of our THX Ultra2-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

The KL-6502-THX delivers effortless dynamic range and brings superior sound to larger areas thanks to its highly regarded THX Select2 certification.

It employs dual 5.25-inch woven fiberglass woofers for amazingly accurate sound, as well as a titanium tweeter mated to an exclusive Tractrix® Horn for flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.
   
Furthermore, the KL-6502-THX offers unlimited flexibility. It is timbre matched to all of our THX-certified products, so you can mix and match to create an unbeatable, discreet stereo or home theater system that’s just right for you.

Never before has Klipsch offered such premium performance in an in-wall speaker. You’ll discover it delivers effortless dynamic range and brings superior sound to larger rooms thanks to its highly regarded THX Select2 certification.  

The KL-6504-THX employs four high-output 5.25-inch fiberglass woofers for powerful bass impact, while a 1-inch titanium tweeter mated to a new symmetrical pattern 90 x 90 square Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. This exclusive horn design also allows the speaker to consistently deliver unbeatable sound, whether it’s installed horizontally or vertically.

The KL-6504-THX’s titanium horn-loaded tweeter is mated to the woofers using precision-voiced, high-definition crossover networks, creating high sensitivity. This makes the speaker easier to drive, so it requires a lot less amplification power than conventional designs.

Adding to its first-class sound, the KL-6504-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KL-6504-THX comes with a lot of options. It is timbre matched to all of our THX-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

The R-2502-W employs dual 5.25-inch polymer woofer cones for accurate sound with dynamic detail, while a silk dome tweeter mated to a symmetrical pattern 90 x 90 conical horn generates flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor. IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers.
   
Furthermore, the R-2502-W offers unlimited flexibility. It is timbre matched to all of our 2000 series architectural products, so you can mix and match to create an affordable, discreet stereo or home theater system that’s just right for you.

The R-5502-W employs dual 5.25-inch Cerametallic woofer cones for fast, accurate sound with dynamic detail, while a titanium tweeter mated to a pivoting Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.

Bass and treble switches with custom EQ settings allow the speaker to be tailored to its environment, while IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers.
   
Furthermore, the R-5502-W offers unlimited flexibility. It is timbre matched to all of our 5000 series architectural products, so you can mix and match to create a high-performance, discreet stereo or home theater system that’s just right for you.

Because of its THX® Ultra2 certification, the KS-7800-THX works well with movie presentations playing up to reference levels in rooms of 3,000 cubic feet or larger. 

The KS-7800-THX is also capable of delivering the same high-output, low distortion signature sound as its traditional enclosure counterpart, the KS-525-THX. It employs an 8-inch aluminum woofer and a patented horn array, consisting of two vertically-stacked Tractrix Horn-loaded tweeters.

In order to create enveloping sound fields and precise localization of individual effects, this speaker also utilizes Klipsch's Wide Dispersion Surround Technology™. Also referred to as WDST, this no-compromise approach gives the KS-7800-THX much more placement flexibility than conventional designs. 

Featuring an integrated back box enclosure, the KS-7800-THX's response is both predictable and repeatable. Because this enclosure fits easily within the loudspeaker's footprint, the KS-7800-THX can be installed into new or existing construction. 

Combine this dynamic loudspeaker with Klipsch's KL-7800-THX LCR speaker, KW-120-THX subwoofer and KA-1000-THX subwoofer amplifier to create a variety of THX Ultra2 in-wall system configurations. The KS-7800-THX can also be mixed and matched with the Klipsch THX Ultra2 traditional box products.

The KS-525-THX produces a smooth, seamless, broad distribution of sound by employing a pair of 5.25-inch Cerametallic™ woofers and dual 5-inch square Tractrix® Horn tweeters in a Wide Dispersion Surround Technology array. WDST is the industry's no-compromise approach to surround speaker design because it offers both rich, immersion surround sound and precise localization of individual effects from a speaker that has much more placement flexibility than conventional designs.

This surround's sealed enclosure has the dado and rabbet construction used in Klipsch professional speakers, ensuring cabinet integrity in suspended applications. The Omni-Mount suspension points facilitate wall or ceiling mounting using standard hardware.

Available in a custom Galaxy black finish with an aluminum fascia, the KS-525-THX also utilizes top-of-the-line internal wiring to help listeners experience the true impact and exhilaration of surround sound.

This systems exclusive Klipsch MicroTractrix® Horn maximizes digital technologies such as CDs, MP3 downloads, streaming radio programs and other popular personal audio applications, and delivers a level of power and accuracy never before available. The high output digital hybrid amplifier driven ProMedia 2.1 computer speaker system incorporates a convenient headphone jack as well as a miniplug input that makes it compatible with gaming consoles and most portable audio devices. This powerful computer speaker system is currently available in 120 volt version only.

Small speakers with big sound, the Groove PM20 lets you easily and affordably enjoy music, movies, and games on your laptop or PC. Thanks to an auxiliary input, it even delivers dynamic performances from most any audio source, including TVs, iPods, and DVD players. And the Groove PM20 is more than just a great entertainer; it looks as good as it sounds. Its streamlined, space-saving design will transform any desktop into a stylish entertainment center.

The SS.5 is a two-way sealed system that features two 1-inch magnetically shielded polymer compression drivers with 90º x 60º Tractrix® Horns and a 4-inch magnetically shielded woofer. This unbeatable combination delivers high output with low distortion, broad dynamics and controlled coverage.

Finished in the traditional Synergy jet ash vinyl veneer, the SS.5 blends well with any home entertainment system and creates a seamless surround-sound experience even in listening areas with less-than-ideal configurations.  This impressive surround delivers the performance of speakers twice its price.

To the eye, the WS-24 surround speaker reflects a classic approach, featuring a furniture-grade wood veneer cabinet available in an espresso or a cabernet finish. But to the ear, there is nothing traditional about it.

The WS-24 surround speaker employs two premium titanium diaphragm compression drivers and two high-output fiberglass cone woofers. But what really makes this unobtrusive speaker superior is an all-new patent-pending Tractrix® Horn-loaded tweeter with XT technology. For over 60 years, horns have been the driving force behind our stunningly precise sound; this latest design moves us farther ahead by allowing the WS-24 to deliver an extremely smooth response with constant directivity.

Furthermore, our exclusive Wide Dispersion Surround Technology, or WDST, allows the WS-24 to create a smooth, high dispersion pattern, providing crystal-clear sonic detail even in listening areas with less than ideal configurations. So, no matter where you sit, this speaker promises to draw you into the middle of the action.  

Overall, the entire Icon W Series brings our sound mantra—power, detail and emotion—to a new generation of audio enthusiasts who demand aesthetically pleasing products that still deliver outstanding sonic performance.

Our top-of-the-line in-ceiling surround speaker, the KS-7502-THX uses highly respected certification, patented technology and premium materials to deliver compelling audio experiences that are second to none. In fact, most in-ceiling surrounds can’t “fool” listeners into believing the sound is coming from all around them, rather than from above. But that’s not a problem for the KS-7502-THX, as it offers a smooth, seamless broad distribution of sound.

The KS-7502-THX employs dual 5.25-inch Cerametallic woofers that operate in an enclosed tuned-port chamber. These exclusive woofer cones offer superb damping characteristics that will not flex or resonate at frequencies within the drivers’ operating ranges, resulting in consistent bass response regardless of the installation or ceiling air space.

Dual 1-inch titanium horn-loaded tweeters lie in a patented vertically stacked Wide Dispersion Surround Technology array, producing enveloping surround performances and precise localization of individual effects.

Adding to its first-class sound, the KS-7502-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KS-7502-THX comes with a lot of options. It is timbre matched to all of our THX Ultra2-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

Adopting a completely new cabinet and driver layout that is similar to the Klipsch THX® Ultra2 KS-525-THX surround speaker, the RS-42 establishes greater output, improved coverage and increased power handling to further extend Klipsch's best-in-class surround sound performance.

Exclusive Tractrix® Horns have always been the key component of the Reference Series. In the RS-42, this technology has been refined to include improved throat geometry for a more genuine, lifelike sound. Behind the speaker's dual horns lie 1-inch titanium tweeters with powerful neodymium magnet motor structures to provide a unique combination of precision, clarity and effortless dynamics.

The RS-42 employs dual 4-inch woofers for a solid bass foundation. These Cerametallic™ woofers with inverted copper dust caps exhibit a very high stiffness-to-mass ratio and superb damping characteristics.

Klipsch Wide Dispersion Surround Technology™ (WDST) provides crystal-clear sonic detail even in listening areas with less than ideal configurations. The Tractrix Horns deliver a 90-degree wide by 60-degree high dispersion pattern. By aligning two horns at 90-degrees with respect to each other, WDST smoothly covers a 180-degree horizontal arc. In other words, the surround sound is pointed at you no matter where you are seated.

While increased baffle ribbing around the horn mouth dramatically improves acoustics across the sonic range, the crossover utilizes Klipsch custom internal wiring and the finest components to provide signal purity and perfect driver integration.

Available in a matte black vinyl finish, the RS-42 also features side-firing ports to eliminate turbulence noise and back-panel keyholes and ¼" threaded inserts to simplify installation. A low-diffraction, magnetically attached grille further accentuates the elegance of this speaker.

Adopting a completely new cabinet and driver layout that is similar to the Klipsch THX® Ultra2 KS-525-THX surround speaker, the RS-52 establishes greater output, improved coverage and increased power handling to further extend Klipsch's best-in-class surround sound performance.

Exclusive Tractrix® Horns have always been the key component of the Reference Series. In the RS-52, this technology has been refined to include improved throat geometry for a more genuine, lifelike sound. Behind the speaker's dual horns lie 1-inch titanium tweeters with powerful neodymium magnet motor structures to provide a unique combination of precision, clarity and effortless dynamics.

The RS-52 employs dual 5.25-inch woofers for a solid bass foundation. These Cerametallic™ woofers with inverted copper dust caps exhibit a very high stiffness-to-mass ratio and superb damping characteristics.

Klipsch Wide Dispersion Surround Technology™ (WDST) provides crystal-clear sonic detail even in listening areas with less than ideal configurations. The Tractrix Horns deliver a 90-degree wide by 60-degree high dispersion pattern. By aligning two horns at 90-degrees with respect to each other, WDST smoothly covers a 180-degree horizontal arc. In other words, the surround sound is pointed at you no matter where you are seated.

While increased baffle ribbing around the horn mouth dramatically improves acoustics across the sonic range, the crossover utilizes Klipsch custom internal wiring and the finest components to provide signal purity and perfect driver integration.

Available in a matte black vinyl finish, the RS-52 also features side-firing ports to eliminate turbulence noise and back-panel keyholes and ¼" threaded inserts to simplify installation. A low-diffraction, magnetically attached grille further accentuates the elegance of this speaker.

Adopting a completely new cabinet and driver layout that is similar to the Klipsch THX® Ultra2 KS-525-THX surround speaker, the RS-62 establishes greater output, improved coverage and increased power handling to further extend Klipsch's best-in-class surround sound performance.

Exclusive Tractrix® Horns have always been the key component of the Reference Series. In the RS-62, this technology has been refined to include improved throat geometry for a more genuine, lifelike sound. Behind the speaker's dual horns lie 1-inch titanium tweeters with large ceramic motor structures to provide a unique combination of precision, clarity and effortless power.

The RS-62 employs dual 6.5-inch woofers for a solid bass foundation. These Cerametallic™ woofers with inverted copper dust caps exhibit a very high stiffness-to-mass ratio and superb damping characteristics.

Klipsch Wide Dispersion Surround Technology™ (WDST) provides crystal-clear sonic detail even in listening areas with less than ideal configurations. The Tractrix Horns deliver a 90-degree wide by 60-degree high dispersion pattern. By aligning two horns at 90-degrees with respect to each other, WDST smoothly covers a 180-degree horizontal arc. In other words, the surround sound is pointed at you no matter where you are seated.

While increased baffle ribbing around the horn mouth dramatically improves acoustics across the sonic range, the crossover utilizes Klipsch custom internal wiring and the finest components to provide signal purity and perfect driver integration.

Available in a matte black vinyl finish, the RS-62 also features side-firing ports to eliminate turbulence noise and back-panel keyholes and ¼" threaded inserts to simplify installation. A low-diffraction, magnetically attached grille further accentuates the elegance of this speaker.

The RS-10 delivers precise sonic detail through the careful positioning of two Tractrix® Horn loaded titanium-dome tweeters and one 4-inch woofer. By aligning the two horns at 90 degrees with respect to each other, along with the front-firing woofer, the RS-10 smoothly covers a 180-degree horizontal arc, allowing maximum placement flexibility. This unique Wide Dispersion Surround Technology™ delivers a new dimension of reality and convenience, and produces a smooth, seamless broad distribution of sound, which is the perfect vehicle for every surround format.

The woofer on the RS-10 still features Klipsch's distinctive, copper-colored Cerametallic™ material. Made with an anodized aluminum, this cone is strong and dent resistant. The anodizing process converts its inner and outer surfaces to ceramic. The outcome is a rigid cone with superb damping characteristics that will not flex or resonate at frequencies within the woofer's operating range.

As in all Reference Series speakers, the RS-10 crossover network is constructed using extremely high-quality components including top-of-the-line internal wiring, polyester film-type capacitors and an air-core inductor to ensure signal purity and proper driver integration.

The RS-10 comes with a back-panel keyhole for on-wall mounting and a threaded insert for attachment to popular adjustable wall and ceiling brackets.

Available in a black vinyl finish, the RS-10 features a low-diffraction sculpted baffle and a grille for an elegant fit and finish.

Because it is capable of producing enveloping ambient sound fields and localizing specific surround effects, the RS-10 will give its listeners a level of you-are-there realism that is unheard of in this price category.

This third generation Synergy surround speaker also benefits from more than 55 years of Klipsch engineering experience and aesthetic upgrades that are representative of a new quality of craftsmanship.

The S-2 delivers precise sonic detail through the careful positioning of two Tractrix® Horn loaded aluminum-dome tweeters and one 5.25-inch IMG woofer. By aligning the two horns at 90 degrees with respect to each other, along with the front-firing woofer, the S-2 smoothly covers a 180-degree horizontal arc, allowing maximum placement flexibility.

Available in a black finish with titanium accents, the contemporary look of the S-2 is two-fold. With its grille on, the S-2 offers a sense of elegance that nicely blends in with your home décor, but take the grille off and you get an aggressive and powerful statement that exudes extreme performance.

This sophisticated surround speaker looks and sounds expensive but it's actually offered at an enticing price that let's you experience the full impact of special effects.

This third generation Synergy surround speaker also benefits from more than 55 years of Klipsch engineering experience and aesthetic upgrades that are representative of a new quality of craftsmanship.

The S-1 delivers amazingly realistic performances through the careful positioning of two Tractrix® Horn loaded aluminum-dome tweeters and one 4-inch IMG woofer. By aligning the two horns at 90 degrees with respect to each other, along with the front firing woofer, the S-1 smoothly covers a 180-degree horizontal arc, allowing maximum placement flexibility.

Available in a black finish with titanium accents, the contemporary look of the S-1 is two-fold. With its grille on, the S-1 offers a sense of elegance that nicely blends in with your home décor, but take the grille off and you get an aggressive and powerful statement that exudes extreme performance.

This impressive surround delivers the performance of speakers twice its price by creating enveloping sound that places you in the middle of the action, as well as correctly localizing specific sounds so that what you hear matches what you see on the screen.

Designed specifically for surround use in home theater applications, the R-5650-S employs a 6.5-inch Cerametallic™ woofer and dual 1-inch titanium compression drivers. Because of its patented horn array, which is two vertically stacked Tractrix® Horn-loaded tweeters pointing in opposite directions, the R-5650-S outperforms conventional designs by maximizing diffusion, clarity and efficiency, while minimizing room interactions that blur sonic detail.

The R-5650-S draws listeners into the middle of the action through the use of Klipsch's proprietary Wide Dispersion Surround Technology or WDST™. The careful alignment of the two controlled-directivity Tractrix Horn tweeters, angled opposite of one another, yields an incredibly wide dispersion pattern.

Able to function in any standard wall, ceiling or drop ceiling, the R-5650-S can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

This third generation Synergy center channel benefits from more than 55 years of Klipsch engineering experience and aesthetic upgrades that are representative of a new quality of craftsmanship.

The C-1 delivers subtle and thrilling performances by employing dual 4-inch magnetically shielded, IMG woofers and a 0.75-inch magnetically shielded, aluminum-dome tweeter coupled to an exclusive square Tractrix® Horn, which increases sensitivity and minimizes room interactions that blur sonic detail.

Available in a black finish with titanium accents, the contemporary look of the C-1 is two-fold. With its grille on, the C-1 offers a sense of elegance that nicely blends in with your home décor, but take the grille off and you get an aggressive and powerful statement that exudes extreme performance.

The C-1 has the panache that allows listeners to hear everything from the faintest whisper to the loudest roar with complete clarity. It is also timbre-matched to the entire range of Synergy speakers.

This third generation Synergy surround speaker also benefits from more than 55 years of Klipsch engineering experience and aesthetic upgrades that are representative of a new quality of craftsmanship.

The S-3 delivers crystal-clear sonic detail through the careful placement of two Tractrix® Horn loaded aluminum-dome tweeters and one 6.5-inch IMG woofer. By aligning the two horns at 90 degrees with respect to each other, along with the front-firing woofer, the S-3 smoothly covers a 180-degree horizontal arc, allowing maximum placement flexibility.

Available in a black finish with titanium accents, the contemporary look of the S-3 is two-fold. With its grille on, the S-3 offers a sense of elegance that nicely blends in with your home décor, but take the grille off and you get an aggressive and powerful statement that exudes extreme performance.

Equally adept to establishing enveloping ambient sound fields and localizing specific surround effects, the S-3 WDST surround delivers the full impact of special effects, resulting in the ultimate you-are-there experience.

Introducing the P-27S surround, along with the entire Palladium™ Series, Klipsch has solidly established itself in the high-end luxury arena. In fact, this speaker is a pinnacle of modern-day horn-loaded technology, letting you hear and emotionally connect with your music and movies precisely as the original artist or director intended.

The Speaker as Sculpture
Designed with an eye toward home interior and furniture designs, the P-27S has a signature style that blends classic Klipsch audio and a clean, contemporary look.

The speaker’s enclosure hints at the power and performance inside, while maintaining a high degree of sophistication and beauty. Its cabinet is molded out of the same high-grade material as its Tractrix® Horns and features a dark smoked nickel satin finish. The end caps feature a zebra-grain Linia veneer that’s available in three different finishes: natural, merlot and espresso. The horizontal linear grain and absence of visible fasteners allows the P-27S to elegantly complement your furniture and décor.

From every angle, every perspective, the P-27S surround speaker is how luxury should look. It’s a treat for the senses—even before you hear it.   

A Legacy Reborn
Since 1946, Klipsch has been synonymous with horn-loaded technology. And since then, we’ve been guided by the four design principles set forth by our founder Paul W. Klipsch: high efficiency with low distortion, controlled directivity, flat frequency response and wide dynamic range. After just one listen, you’ll discover the P-27S represents the latest advancement in horn technology and purest application of those design principles yet.

In order to achieve realistic and enveloping surround sound experiences, the P-27S employs dual 0.75-inch titanium diaphragm compression drivers mated to 90º by 70º Tractrix Horns in our exclusive Wide Dispersion Surround Technology array, also known as WDST. It’s a design that provides crystal-clear sonic detail even in listening areas with less than ideal configurations, so the surround sound is pointed at you no matter where you sit.

For superior bass performance, the P-27S’s low-frequency driver employs dual 7-inch hybrid cone woofers, powered by a unique neodymium magnet structure. Dual ports on the front of the speaker enhance low-distortion bass response. Each woofer’s voice coil responds accurately to the smallest signal modulation, yet can also handle the high power of the most demanding soundtracks.  

Many speakers of this caliber rely on off-the-shelf drivers; every P-27S driver has been engineered and built for this specific application. Years of research, development and testing resulted in a remarkable driver design that exceeds even our own high performance standards.  

Visit the Palladium mini-site for more information.

This third generation Synergy center channel benefits from more than 55 years of Klipsch engineering experience and aesthetic upgrades that are representative of a new quality of craftsmanship.

The C-3 is a two-way Tapered Array system that utilizes a pair of 6.5-inch magnetically shielded, IMG woofers and a 1-inch magnetically shielded, aluminum-dome tweeter coupled to a square Tractrix® Horn, which increases sensitivity and minimizes room interactions that blur sonic detail. The C-3 offers bi-wire capabilities allowing the use of one or two speaker level inputs as desired for improved connectivity.

Available in a black finish with titanium accents, the contemporary look of the C-3 is two-fold. With its grille on, the C-3 offers a sense of elegance that nicely blends in with your home décor, but take the grille off and you get an aggressive and powerful statement that exudes extreme performance.

The C-3 offers a seamless, engaging soundstage that puts audiences in the middle of the action. By adding this center channel to your home theater system, you will transform songs into live concerts and movies into lifelike adventures.

The SC.5 uses a 1-inch magnetically shielded polymer dome compression driver coupled to a 4-inch square Tractrix® Horn for the high frequencies and two 4-inch graphite-injected woofers for the lows. This winning combination delivers high output with low distortion, broad dynamics, controlled coverage and flat frequency response. Other class-leading design features, such as high-definition crossover networks and internally braced enclosures help ensure peak performance from every SC.5, while the unique venting system of its cast-polymer woofer frame cools the voice coil to enhance reliability.

The SC.5's multi-angle enclosure facilitates placement either above or below a television screen. This center channel also features a "floating," or suspended grille design, which minimizes image impairing sonic reflections and complements the jet ash vinyl veneer finish.

This sonically and aesthetically appealing center channel delivers the lifelike dialogue needed to turn ordinary living rooms into theater spaces.

The Synergy Series C-2 center channel offers phenomenal sound and stylish flair at an affordable price point. It has been designed to deliver all the detail, subtleties and dynamics required for the ultimate home theater experience.

This third generation Synergy center channel benefits from more than 55 years of Klipsch engineering experience and aesthetic upgrades that are representative of a new quality of craftsmanship.

The C-2 is a two-way Tapered Array system that utilizes a pair of 5.25-inch magnetically shielded, IMG woofers and a 1-inch magnetically shielded, aluminum-dome tweeter coupled to a square Tractrix® Horn, which increases sensitivity and minimizes room interactions that blur sonic detail. The C-2 offers bi-wire capabilities allowing the use of one or two speaker level inputs as desired for improved connectivity.

Available in a black finish with titanium accents, the contemporary look of the C-2 is two-fold. With its grille on, the C-2 offers a sense of elegance that nicely blends in with your home décor, but take the grille off and you get an aggressive and powerful statement that exudes extreme performance.

To the eye, the WC-24 center channel speaker reflects a classic approach, featuring a furniture-grade wood veneer cabinet available in an espresso or a cabernet finish. But to the ear, there is nothing traditional about it.

The WC-24 employs a premium titanium diaphragm compression driver and two high-output fiberglass cone woofers for amazing theater sound. But what really makes this center channel speaker come to life is an all-new patent-pending Tractrix® Horn-loaded tweeter with XT technology. For over 60 years, horns have been the driving force behind our stunningly precise sound; this latest design moves us farther ahead by allowing the WC-24 to deliver an extremely smooth response with constant directivity.
 
Overall, the entire Icon W Series brings our sound mantra—power, detail and emotion—to a new generation of audio enthusiasts who demand aesthetically pleasing products that still deliver outstanding sonic performance.

Exclusive Tractrix® Horns have always been the key component of this critically acclaimed series. In the RC-62, this technology has been refined to include improved throat geometry for a more genuine, lifelike sound. Behind the horn lies a 1-inch titanium tweeter with a large ceramic motor structure to provide a unique combination of precision, clarity and effortless power.

The RC-62 employs dual 6.5-inch woofers for a solid bass foundation. These Cerametallic™ woofers with inverted copper dust caps exhibit a very high stiffness-to-mass ratio and superb damping characteristics.

Klipsch Tapered Array™ technology operates both woofers at the lowest frequencies - maintaining the high output capability necessary for good center channel performance - but only one operates all the way through the midrange to where the tweeter takes over. This eliminates acoustic interference between the woofer outputs, a flaw in conventional speaker designs that can severely impair sound quality at the sides of the listening area.

The RC-62's rigid cabinet offers improved internal cross-bracing to minimize panel vibrations that can color sound. Twin front-firing ports eliminate turbulence noise, while increased baffle ribbing around the horn mouth dramatically improves acoustics across the sonic range. For signal purity and perfect driver integration, the crossover on the RC-62 features the finest components and Klipsch custom internal wiring.

Available in a black woodgrain vinyl finish, the fully video-shielded RC-62 comes with a low-diffraction, magnetically attached grille to further accentuate the elegance of this speaker.

Engineered by the best in the industry, the XL-12 uses premium components and technology to deliver larger-than-life performances that are second to none. It's even considered one of the company's most versatile models to date as it makes a great main, center or rear speaker.  

But what makes this LCR speaker truly special is an all-new patent-pending Tractrix® Horn-loaded tweeter with XT technology. For over 60 years, horns have been the driving force behind our stunningly precise sound, and this latest design moves us farther ahead by allowing the slender XL-12 to deliver an extremely smooth response with constant directivity.
     
Offering more than just a signature sound, the XL-12 also has a signature style. Its beautifully crafted aluminum extruded enclosure, featuring an anodized black-grain finish and high-gloss black accents, is the direct result of our engineers’ quest for perfect balance. In fact, it’s a look that brings a splash of sophistication to any room.

For increased placement flexibility, the XL-12 can be paired with the company’s optional XFS floor stand.