The IK-802-W installation kit offers increased mounting flexibility for our THX® Ultra2 in-wall speakers and RW-5802 in-wall subwoofer.

This revolutionary kit design incorporates a color-coded mud ring for easy size identification, a breakaway wire tie and multi-position snap fit wings.

The metal wings easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a color-coded mud ring for easy size identification, a breakaway wire tie and multi-position snap fit wings.

The metal wings easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a color-coded mud ring for easy size identification, a breakaway wire tie and multi-position snap fit wings.

The metal wings easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

 *This kit is NOT plenum rated.

Designed to fit all Reference Series in-wall speakers with 6.5-inch woofers, the ME-650-W allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-W is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-W fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-W's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.