Most distributed audio systems are plagued with thin-sounding performances, but the new IC-8T-SW in-ceiling subwoofer changes everything. Engineered for music reinforcement applications, these unobtrusive, easy-to-install loudspeakers feature a transformer-less design for 70.7V/100V distributed-line systems. Since transformers severely limit a subwoofer's capabilities, this unique design is the perfect solution when building a great sounding commercial system. 

The IC-8T-SW adds more dimension to any in-ceiling configuration by using an 8-inch woofer, 8-inch drone, polypropylene cones and high-temperature voice coils in the woofer. While most subwoofers use a port to increase output, the IC-8T-SW employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and minimizes turbulence that is often present in ported designs. Maximum continuous output is a remarkable 111dB. And since AES rated sensitivity is 92dB, adequate levels can be achieved with modest amplifier power using the IC-8T-SW. 

Other key features of the IC-8T-SW include the ability to easily switch from low impedance to high impedance distributed-line applications as well as mono and two-channel inputs in low impedance modes. This durable subwoofer has an ABS plastic baffle, formed steel back can and a four-point terminal strip input connector. The IC-8T-SW is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 061347) is also available for drywall ceiling installations.

Visit our special headphone site for even more information.

A Legend in Sound, A Tradition of Progress
At the heart of every Klipsch product is over 60 years of audio expertise beating strong.
Our commitment to no-compromise performance has made us the preferred choice of top cinema operators, a leader in stereo and home theater sound and now a premium name in headphones.

Great Comfort and Fit 
Featuring a black soft-feel paint finish with off-white lettering on its earbuds, Custom-1 earphones utilize dark gray patent-pending Contour Ear Gels that are anatomically designed to accurately fit inside the human ear canal. These soft, oval silicon tips reduce ear fatigue as well as provide an amazing seal for excellent noise isolation and bass response.

Because ear canal measurements vary, Custom-1 comes with five different washable ear gel sizes: small, medium, and large single flange designs as well as small and large double flange designs. Such variety allows these earphones to fit more of the population than the competition.

For perfect exterior comfort, flexible ear wires bend over and around the ears so they can be customized to each user. And not only do these adaptable wires provide optimal comfort, they also let users experience full or partial noise isolation—a great safety feature for on-the-go users. Just pull the ear gels out of the ear canals and adjust the wires to firmly position the earphone nozzles over the canals.

Great Sound
Wherever you go, Custom-1 lets stunningly precise audio go with you. Exclusive KG332 balanced armatures generate deeper bass, a more robust midrange, and clearer high notes for that true-to-life listening experience only Klipsch can deliver. 

Built to Last
Klipsch has gone to great lengths to ensure the long-lasting durability of Custom-1 earphones, up to and including its 50-inch-long cables. Put through extensive “real world” testing, these headphones feature appropriate strain relief at every cable connection point to help prevent wire damage. Plus, underneath the cable’s black cloth weaving, a special PVC Wireguard jacket prevents the wires from becoming exposed and frayed.

Added Frills
Great iPod® headphones, Custom-1 is also compatible with the iPhone™ and virtually any device with a headphone jack. These headphones come with a compact high-quality vinyl carrying case, five sets of different-sized ear gels, and an ear tip cleaning tool. 

Custom FAQs

How do I get the flexible ear wires to mold precisely around my ears?
The flexible ear wires come pre-formed to fit most ears. However, to get a true custom feel, you will need to tweak the bend. Start by gently forming it to the back of your ear. You may need to adjust the angle of the earbud in your ear to help achieve a good seal or eliminate pressure points. Plan on spending up to five minutes checking the ear tip fit and wire adjustment. In many instances, you will need to bend the wire so that the nozzle is pointing forward and upward. Once you get it right, you'll find it was time well spent.

Why am I not getting enough bass response?
It’s probably because you don’t have the right ear seal. Be sure to try out the various ear tip sizes as you may find that you need the double flange design to achieve the best possible seal. You may also want to try pulling the ear tip back slightly as it may have collapsed.

How do I know if I have a good ear seal?
When no music is playing, your voice should sound louder and ambient noise should sound quieter, very similar to wearing a pair of ear plugs. Creating a tighter seal is simple. Insert the ear gel into the ear canal and then gently pull it back. This adjustment eliminates virtually all external noise so you can play your music at a lower volume, for a longer period of time, without experiencing ear fatigue.

Read more FAQs. 

Special Features

Learn how compression formats affect digital music quality.

Read about headphone design challenges.

• Proven Monster Cable XP technology; Magnetic Flux Tube® and special cable windings for natural music reproduction.
• Impressive clarity, bass response, and dynamic range in a compact design.
• Special LPE insulation reduces signal loss and distortion.
• Special compact design makes installation easy.
• Extended wire lengths for greatest system set-up flexibility.

Not compatible with GMX A2.1

• Proven Monster Cable XP technology; Magnetic Flux Tube® and special cable windings for natural music reproduction.
• Impressive clarity, bass response, and dynamic range in a compact design.
• Special LPE insulation reduces signal loss and distortion.
• Special compact design makes installation easy.
• Extended wire lengths for greatest system set-up flexibility.
• Compatible with ProMedia™ v.2-400 and 4.1

• Proven Monster Cable XP technology; Magnetic Flux Tube® and special cable windings for natural music reproduction.
• Impressive clarity, bass response, and dynamic range in a compact design.
• Special LPE insulation reduces signal loss and distortion.
• Special compact design makes installation easy.
• Extended wire lengths for greatest system set-up flexibility.

Not compatible with the GMX D5.1

Visit our special headphone site for even more information.

A Legend in Sound, A Tradition of Progress
At the heart of every Klipsch product is over 60 years of audio expertise beating strong. Our commitment to no-compromise performance has made us the preferred choice of top cinema operators, a leader in stereo and home theater sound and now a premium name in headphones.

Great Comfort and Fit 
Featuring a black soft-feel paint finish with silver accents on its earbuds, Custom-2 earphones utilize dark gray patent-pending Contour Ear Gels that are anatomically designed to accurately fit inside the human ear canal. These soft, oval silicon tips reduce ear fatigue as well as provide an amazing seal for excellent noise isolation and bass response.

Because ear canal measurements vary, Custom-2 comes with five different washable ear gel sizes: small, medium, and large single flange designs as well as small and large double flange designs.  Such variety allows these earphones to fit more of the population than the competition.

For perfect exterior comfort, flexible ear wires bend over and around the ears so they can be customized to each user. And not only do these adaptable wires provide optimal comfort, they also let users experience full or partial noise isolation—a great safety feature for on-the-go users. Just pull the ear gels out of the ear canals and adjust the wires to firmly position the earphone nozzles over the canals.

Great Sound
Dynamic earphones are a must for true-to-life audio experiences and Custom-2 makes it a reality. Coupling over 60 years of audio expertise with exclusive KG534 dual-balanced armatures, Custom-2 headphones deliver clear highs and thundering lows. 

Built to Last
Klipsch has gone to great lengths to ensure the long-lasting durability of Custom-2 earphones, up to and including its 50-inch-long cables. Put through extensive “real world” testing, these headphones feature appropriate strain relief at every cable connection point to help prevent wire damage. Plus, underneath the cable’s black cloth weaving, a special PVC Wireguard jacket prevents the wires from becoming exposed and frayed.

Added Frills
Great iPod® headphones, Custom-2 is also compatible with the iPhone™ and virtually any device with a headphone jack. These headphones come with a high-quality vinyl carrying case that will also fit an 80G iPod, an airplane adaptor, five sets of different-sized ear gels, and an ear tip cleaning tool. 

Custom FAQs

How do I get the flexible ear wires to mold precisely around my ears?
The flexible ear wires come pre-formed to fit most ears. However, to get a true custom feel, you will need to tweak the bend. Start by gently forming it to the back of your ear. You may need to adjust the angle of the earbud in your ear to help achieve a good seal or eliminate pressure points. Plan on spending up to five minutes checking the ear tip fit and wire adjustment. In many instances, you will need to bend the wire so that the nozzle is pointing forward and upward. Once you get it right, you'll find it was time well spent. 

Why am I not getting enough bass response?
It’s probably because you don’t have the right ear seal. Be sure to try out the various ear tip sizes as you may find that you need the double flange design to achieve the best possible seal. You may also want to try pulling the ear tip back slightly as it may have collapsed.

How do I know if I have a good ear seal?
When no music is playing, your voice should sound louder and ambient noise should sound quieter, very similar to wearing a pair of ear plugs. Creating a tighter seal is simple. Insert the ear gel into the ear canal and then gently pull it back. This adjustment eliminates virtually all external noise so you can play your music at a lower volume, for a longer period of time, without experiencing ear fatigue.

Read more FAQs.

Special Features

Learn how compression formats affect digital music quality.

Read about headphone design challenges.

Raise your Klipsch multimedia speakers to a new level of performance with the OmniMount SAT 2 speaker stand. Designed for use with smaller bookshelf and micro satellite speakers, the SAT 2 uses an exclusive new extruded aluminum three-point teardrop base for improved stability and stylish appearance.

The SAT 2 comes with an adjustable width top-plate and adapters to fit a variety of speakers. It is compatible with Klipsch's ProMedia v2-400, 2.1, 4.1, Ultra 5.1, and Quintet II and III satellites (Quintet III satellites require an adaptor that is included in boxes beginning November 2006.  If your box does not contain this adaptor, please contact Omnimount customer service at 1-800-MOUNT-IT to receive one).

This high-quality stand gets its seamless appearance by hiding unsightly wiring through its outer post. The SAT 2 has an adjustable height of 31 to 45 inches and can handle a maximum of 10 pounds. All parts are included for easy assembly.

A Legend in Sound, A Tradition of Progress

At the heart of every Klipsch product is over 60 years of audio expertise beating strong.
Our commitment to no-compromise performance has made us the preferred choice of top cinema operators, a leader in stereo and home theater sound and now a premium name in headphones.

Bigger than its award-winning and highly praised predecessor—the flagship Image X10—by only 2mm in diameter, the X5 is still very tiny and lightweight, continuing the Image legacy of being the smallest, most comfortable in-ear headphones on the market.

Complete Comfort and Fit
Image X5 earphones feature proprietary Contour Ear Gels that naturally fit the shape of your ear canals, reducing ear fatigue and producing a perfect acoustic seal. A good seal minimizes outside noise and allows you to enjoy your music at lower, safer volumes. Each flexible, oval-shaped ear gel is also light and narrow, making it almost impossible to feel inside your ear.

The X5 comes with five different sizes of washable ear gels: small, medium, and large single flange designs, as well as small and large double flange designs. This way, virtually everyone can find a precise fit.

Total Immersion
The X5 is designed to continue Klipsch’s 60-plus years of delivering stunningly precise audio. It is a balanced full-range armature driver design with a tuned bass-reflex system for crisp, clear highs and deep, impressive lows. In other words, you can experience rich, enveloping sound performances that virtually put you on stage with your favorite artists.

Beauty in the Details
A must-have for fashion-forward listeners, the X5 headphones feature sophisticated electroplated aluminum housings and streamlined, aerodynamic-shaped black “tails.” These flexible tails not only look good, they reduce cable stress and serve as an acoustic damper to minimize cable noise.

Built to Last
Klipsch has gone to great lengths to ensure the long-lasting durability of the Image X5, including its 50-inch-long cables. Put through extensive “real world” testing, these headphones feature strain relief at every cable connection point to help prevent wire damage.

Added Frills
The X5 is compatible with the iPod®, iPhone™ and virtually any device with a headphone jack. These earphones come with a compact pouch, an airplane adaptor, five sets of different-sized ear gels and an ear gel cleaning tool.

Image FAQs

What is the difference between the Image X10 and the Image X5?

The X5 is a slightly larger—by only 2mm in diameter—than the flagship X10, so it’s easier and somewhat less expensive to manufacture, so we can pass the savings on to the end user. However, the X5 is still considered a very small, lightweight design and will continue the Image legacy of being the least fatiguing in-ear headphones around.

With respect to technology and sound performance, the X5 employs a balanced full-range armature driver with a tuned bass-reflex system, while the X10 uses a balanced full-range armature micro-driver with a tuned bass-reflex system. If you like a lot of bass, we recommend purchasing the X10; however, if you like want a superior top end with more forward voicing then the X5 is the right choice for you.

According to the Klipsch engineering team, the X5 continues Klipsch’s sound signature by performing accurately in the frequency and time domain, minimizing any phase distortion with its linear acceleration. As a result, you’ll hear things in your favorite recordings you never noticed before.

Read review that compares the X10 and the X5.

Why am I not getting enough bass response?

It’s probably because you don’t have a good ear seal. Be sure to try out the various ear tip sizes, as you may find that you need the double flange design for the best possible seal. You may also want to try pulling the ear tip out slightly, as it may have collapsed.

How do I know if I have a good seal?

A good seal ensures good sound. When no music is playing, your voice should sound louder and ambient noise should sound quieter, very similar to wearing a pair of ear plugs. Creating a tighter seal is simple. Insert the ear gel into the ear canal and then gently pull it back. This adjustment eliminates virtually all external noise so you can play your music at a lower volume, for a longer period of time, without experiencing ear fatigue.

Read more FAQs.

Special Features

Learn how compression formats affect digital music quality.

Read about headphone design challenges.

This clean, simple design affords the most extreme angle adjustment, with up to 160 degrees of movement for precise speaker positioning in the horizontal plane. Wall stud wood screws included. Attaches via dual keyhole slots for a tight fit to the wall.

Priced per pair

Visit our special headphone site for even more information.

A Legend in Sound, A Tradition of Progress
At the heart of every Klipsch product is over 60 years of audio expertise beating strong. Our commitment to no-compromise performance has made us the preferred choice of top cinema operators, a leader in stereo and home theater sound and now a premium name in headphones.

As the flagship design in the Image family, these award-winning headphones fuse lifestyle, technology and fashion to deliver precise, natural sound as well as stake their claim as the smallest, most comfortable earphones on the market.

Complete Comfort and Fit
Image X10 features proprietary Contour Ear Gels that naturally fit the shape of your ear canals, reducing ear fatigue and producing a perfect acoustic seal. A good seal minimizes outside noise, also known as noise isolation, and allows you to enjoy your music at lower, safer volumes. Each flexible, oval-shaped ear gel is also light and narrow, making it almost impossible to feel inside the ear. 

Image X10 comes with five different sizes of washable ear gels: small, medium, and large single flange designs, as well as small and large double flange designs. This way, virtually everyone can find a precise fit. 

Premium Sound
Inside these compact gems, you’ll find over 60 years of audio expertise ready to let you hear what you’ve been missing. Image X10 uses an exclusive balanced full-range armature micro-driver with a tuned bass-reflex system to deliver superior acoustic experiences with all the dynamics and accuracy you'd expect from Klipsch.  

Beauty in the Details 
A must-have for fashion-forward listeners, Image X10 earphones feature aluminum bodies finished in beautiful anodized copper and streamlined black “tails.” Aside from aesthetic appeal, these flexible “tails” reduce cable stress and serve as an acoustic damper to minimize cable noise.

Built to Last
We’ve gone to great lengths to ensure the long-lasting durability of Image X10, including its 50-inch-long cables. Put through extensive “real world” testing, these headphones feature appropriate strain relief at every cable connection point to help prevent wire damage.

Added Frills
While it makes for a great pair iPod® headphones, Image X10 is also compatible with the iPhone™ and virtually any device with a headphone jack. These earphones come with a carrying case and compact pouch, a ¼-inch adaptor, an airplane adaptor, five sets of different-sized ear gels and an ear gel cleaning tool.

Image X10 FAQs

Why are Image headphones unique and worth the price?
Made up of the X10 and X5, the Image series represents the world’s smallest, lightest full-range earphone family. Meant to be heard and not seen, these tiny headphones are big on performance, style and comfort. Image is loaded with our most advanced comfort features, plus its remarkably lightweight design places minimal pressure on the ears. 

What is the difference between the Image X10 and the Image X5?
The X5 is a slightly larger—by only 2mm in diameter—than the flagship X10, so it’s easier and somewhat less expensive to manufacture, so we can pass the savings on to the end user. However, the X5 is still considered a very small, lightweight design and will continue the Image legacy of being the least fatiguing in-ear headphones around.

With respect to technology and sound performance, the X5 employs a balanced full-range driver with a tuned bass-reflex system, while the X10 uses an exclusive full-range micro-driver with a tuned bass-reflex system. If you like a lot of bass, we recommend purchasing the X10; however, if you like want a superior top end with more forward voicing than the X5 is the right choice for you.

According to the Klipsch engineering team, the X5 continues Klipsch’s sound signature by performing accurately in the frequency and time domain, minimizing any phase distortion with its linear acceleration. As a result, you’ll hear things in your favorite recordings you never noticed before.

Read review that compares the X10 and the X5.

Why am I not getting enough bass response?
It’s probably because you don’t have a good ear seal. Be sure to try out the various ear tip sizes as you may find that you need the double flange design for the best possible seal. You may also want to try pulling the ear tip out slightly as it may have collapsed.

How do I know if I have a good seal?
When no music is playing, your voice should sound louder and ambient noise should sound quieter, very similar to wearing a pair of ear plugs. Creating a tighter seal is simple. Insert the ear gel into the ear canal and then gently pull it back. This adjustment eliminates virtually all external noise so you can play your music at a lower volume, for a longer period of time, without experiencing ear fatigue.

Read more FAQs.

Special Features

Learn how compression formats affect digital music quality.

Read about headphone design challenges. 

Visit our special headphone site for even more information.

A Legend in Sound, A Tradition of Progress
At the heart of every Klipsch product is over 60 years of audio expertise beating strong. Our commitment to no-compromise performance has made us the preferred choice of top cinema operators, a leader in stereo and home theater sound and now a premium name in headphones.

Great Comfort and Fit
Featuring a black soft-feel paint finish with copper accents on its earbuds, Custom-3 earphones utilize dark gray patent-pending Contour Ear Gels that are anatomically designed to accurately fit inside the human ear canal. These soft, oval silicon tips reduce ear fatigue as well as provide an amazing seal for excellent noise isolation and bass response.

Because ear canal measurements vary, Custom-3 headphones come with five different washable ear gel sizes: small, medium, and large single flange designs as well as small and large double flange designs.  Such variety allows these earphones to fit more of the population than the competition.

For perfect exterior comfort, flexible ear wires bend over and around the ears so they can be customized to each user. And not only do these adaptable wires provide optimal comfort, they also let users experience full or partial noise isolation—a great safety feature for on-the-go users. Just pull the ear gels out of the ear canals and adjust the wires to firmly position the earphone nozzles over the canals.

Great Sound
Inside Custom-3 earphones, you’ll find over 60 years of audio expertise ready to get the music inside your head. Exclusive KG723 tweeters, KG731 woofers, and patent-pending electro-acoustic crossover systems let you hear performances just as the artists intended—making Custom-3 an excellent choice for musicians and critical listeners. 

Built to Last
Klipsch has gone to great lengths to ensure the long-lasting durability of Custom-3, up to and including its 50-inch-long cables. Put through extensive “real world” testing, these headphones feature appropriate strain relief at every cable connection point to help prevent wire damage. Plus, underneath the cable’s black cloth weaving, a special PVC Wireguard jacket prevents the wires from becoming exposed and frayed.

Added Frills
Great iPod® headphones, Custom-3 is also compatible with the iPhone™ and virtually any device with a headphone jack. These headphones come with a high-quality carrying case that will also fit an 80G iPod, a ¼-inch adaptor, an airplane adaptor, five sets of different-sized ear gels, and an ear tip cleaning tool. 

Custom FAQs

How do I get the flexible ear wires to mold precisely around my ears?
The flexible ear wires come pre-formed to fit most ears. However, to get a true custom feel, you will need to tweak the bend. Start by gently forming it to the back of your ear. You may need to adjust the angle of the earbud in your ear to help achieve a good seal or eliminate pressure points. Plan on spending up to five minutes checking the ear tip fit and wire adjustment. In many instances, you will need to bend the wire so that the nozzle is pointing forward and upward. Once you get it right, you'll find it was time well spent.

Why am I not getting enough bass response?
It’s probably because you don’t have the right ear seal. Be sure to try out the various ear tip sizes as you may find that you need the double flange design to achieve the best possible seal. You may also want to try pulling the ear tip back slightly as it may have collapsed.

How do I know if I have a good ear seal?
When no music is playing, your voice should sound louder and ambient noise should sound quieter, very similar to wearing a pair of ear plugs. Creating a tighter seal is simple. Insert the ear gel into the ear canal and then gently pull it back. This adjustment eliminates virtually all external noise so you can play your music at a lower volume, for a longer period of time, without experiencing ear fatigue. 

Read more FAQs.

Special Features

Learn how compression formats affect digital music quality.

Read about headphone design challenges.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. A flat side with a raised wall allows it to be mounted directly to a joist, making it much easier to align the speakers with other items in the ceiling.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. A flat side with a raised wall allows it to be mounted directly to a joist, making it much easier to align the speakers with other items in the ceiling.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. A flat side with a raised wall allows it to be mounted directly to a joist, making it much easier to align the speakers with other items in the ceiling.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

A note about iPhone 3G: This product is unable to charge the new iPhone 3G due to a change in voltage. We are currently developing a compatible revision, scheduled for release this fall.

The award-winning RoomGroove iPod speaker utilizes premium woofers, crossovers, and horn-loaded tweeters to deliver accurate, efficient, and compromise-free acoustics. It features a retractable dock that charges all iPods with 30-pin connectors and comes with Apple® universal well inserts to accommodate multiple iPod sizes. Other digital devices easily connect via an auxiliary input.

Available in a sleek black finish, the RoomGroove offers a clean, modern design that fits comfortably into any living environment. It comes with an IR remote control and is ready to perform as soon as you plug it in and dock an iPod or connect an MP3 player.

*Audio Everywhere—Wirelessly!

Watch the KlipschCast demo.

Thanks to KlipschCast™ wireless technology, the RoomGroove not only lets you create a wireless multi-room music system with two or more units, it also works in conjunction with our CS-700 home theater system (sold separately), letting you wirelessly transmit CD-quality AM/FM radio, TV and movie sound all over your house. There’s no wiring beyond the CS-700 satellites and power cords, no holes to drill and no difficult, time-consuming set up.      

How does it work? Simply, through KlipschCast, the CS-700 sends a wireless audio signal to one or more RoomGrooves. This signal can be the same one playing on the CS-700 or something entirely different. The CS-700 is capable of playing up to two separate sources at the same time. For example, the CS-700 can play a DVD movie in the living room, while the RoomGroove broadcasts the CS-700’s AM/FM tuner in the kitchen.

The RoomGroove can also play music locally, utilizing its retractable iPod dock or through its auxiliary input for other MP3 players. Since the RoomGroove is a transceiver, it can transmit as well as receive, allowing it to send this MP3 music signal to other RoomGroove units throughout the house. In fact, users can create a multi-room music system with just RoomGrooves. And, a RoomGroove gives you a choice. If a home has three RoomGrooves and “Song A” is playing in the bedroom and “Song B” is playing in the office, then the RoomGroove in the kitchen can listen to either song or play what’s on its own iPod.

As a side note, the RoomGroove not only brings out the best in your iPod, it will also work with your computer. All you have to do is connect the RoomGroove to your computer via its auxiliary input. This allows you to broadcast your computer's entire music library, including content from your favorite Internet radio station, to other RoomGrooves around your house.  

The robust 2.4GHz wireless technology found in the RoomGroove and CS-700 offers unlimited add-on opportunities. Plus, the technology “sniffs out” the entire 2.4GHz band to detect other wireless technologies in use, such as wireless routers, and then transmits around the spectrum used by those sources. The home code dial on each of these wireless speakers allows you to select a code specific to all of your units to avoid interference from neighbor systems. 

KlipschCast FAQs

Up to what distance can KlipschCast products transmit and receive wireless signals?
These products were designed to have an average transmitting/receiving distance of 75 feet, broadcasting through walls, ceilings and floors. However, every scenario is different because every house is different. Homes that are primarily made of wood and drywall allow the KlipschCast wireless signals to travel great distances; homes featuring a lot of metal and concrete don’t always allow the wireless signals to travel as freely.

What if I lose my RoomGroove remote?
If you own a CS-700, the CS-700 remote can operate the RoomGroove. The only “non-intuitive” button is the input button on the CS-700 remote, which would be the listen button on the RoomGroove remote. 

Can I use KlipschCast products with other wireless products?
KlipschCast products are designed to only work with other KlipschCast products.

Read more FAQs.

Special Features

Watch the RoomGroove demonstration.

Learn how compression formats affect digital music quality.

A note about iPhone 3G: This product is unable to charge the new iPhone 3G due to a change in voltage. We are currently developing a compatible revision, scheduled for release this fall.

*Inserts are for structural (securing the iPod) purposes only. The three well inserts included in the box are for 30g, 60g, 80g, photo and mini iPods.  

1st and 2nd generation Nano inserts are available.  If your unit does not include them, please email promedia@klipsch.com.  We do not have 3rd generation Nano inserts available, however, the universal well inserts included with your iPod  are compatible with the SXT. 

Please note: The video output function of the iGroove SXT is not compatible with the 3rd gen iPod nano, the 6th gen iPod classic, the iPhone, or iTouch.

Applying the same cutting-edge research and technology that drives our professional theater speakers, this high-style, high-performance system uncovers all the power, detail and emotion of your digital music library.  Taking advantage of refined industrial design, high-end materials and innovative technology, the iGroove SXT delivers classic Klipsch sound like never before.

A true two-way system, the iGroove SXT achieves accurate, detailed sound by way of dual 2.5-inch woofers in a ported enclosure, premium crossovers and dual 3/4-inch MicroTractrix™ Horn-loaded tweeters. Klipsch is the only company in the iPod speaker category to utilize horn technology, a design that delivers lifelike sound as well as produces more output using less energy.

The iGroove SXT accepts and charges any iPod with a 30-pin connector. Universal well inserts are included to securely dock assorted iPod models. The shuffle and other audio devices connect via a rear auxiliary input, while an S-video output lets you view videos on external monitors.

Available in a sleek black finish that fits comfortably into any office or living environment, the system comes with an IR remote and is ready to perform as soon as you plug it in and dock an iPod.

Note:  The power adapter and power cord are included with a new unit.  If you need to replace them, they are sold as two separate parts.  You can find them in the related items section of this page.

Special Feature

Learn how compression formats affect digital music quality.

Constructed on a rigid, low-resonance cast-polymer frame, the two-way KHC-6 delivers notably robust bass from its 6.5-inch IMG-cone woofer. Its coaxially mounted 1-inch aluminum-dome compression driver tweeter is mated to a 100º Klipsch Tractrix® Horn that can be swiveled to focus the sound where needed. A tweeter attenuation switch conveniently placed behind the grille provides another tool for tailoring the speaker's output to the acoustics of the environment.

And while the KHC looks very different, its drivers sonically match the freestanding models in the Synergy Series line, producing the same wide dynamic, low distortion performances.

The KHC's white frame and rustproof, powder-coated aluminum grille can be painted to match the ceiling. Mid-sized among the in-ceiling models, the versatile, easy-to-install KHC-6 is an excellent choice for distributed-music systems and other applications requiring unobtrusive, high-quality loudspeakers.

Great sound, easy installation and outstanding reliability make the KHC-6 one of the best values in architectural audio.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2650-SC can be directed towards the listening area.

The CDT-2650-SC features dual 0.75-inch silk tweeters angled opposite one another. The speaker's 6.5-inch polymer woofer can rotate a full 360 degrees and then shift 15 degrees in any direction.

In order to deliver both rich, immersion surround sound and precise localization of individual effects, the CDT-2650-SC features Klipsch's Wide Dispersion Surround Technology™ (WDST). Careful alignment of two silk tweeters, angled opposite one another, yields an exceptionally wide dispersion pattern, delivering a smooth, broad distribution of sound ideal for every surround-sound format and for music as well as movies.

Available in a white finish, the paintable CDT-2650-SC can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-2800-C features a 1-inch silk tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch polymer woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Available in a white finish, the paintable CDT-2800-C can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-2650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-2650-C features a 1-inch silk tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch polymer woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Available in a white finish, the paintable CDT-2650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

This no-comprise, yet affordable, speaker employs a 6.5-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter to deliver mind-bending depth and clarity.

Available in a white finish, this speaker can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Upholding the same high-performance standards as all Klipsch products, this reasonably priced speaker employs a 6.5-inch gray polymer woofer cone and dual 1-inch soft/silk dome tweeters so that it can play both left and right stereo signals with total precision and clarity.

Because it nicely blends in with its surroundings and offers installation flexibility, this amazing performer is sure to be a homeowner and residential contractor favorite.

Available in a white finish, the R-2650-CSM can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

With Klipsch's new R-2800-CSM in-ceiling loudspeaker, affordable architectural audio has never sounded so good. Upholding the same high-performance standards as all Klipsch products, this summed mono model employs an 8-inch gray polymer woofer cone and dual 1-inch soft/silk dome tweeters so that it can play both left and right stereo signals with total precision and clarity. 

Available in a white finish, this speaker can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The RW-5101-C proves that domestic harmony and powerful home theater performance can co-exist. In other words, just because you can’t see this in-ceiling subwoofer, doesn’t mean you won’t feel it. This hard-hitter generates clean, potent bass that’ll lift you out of your seat. It also continues the Klipsch tradition of high output with low distortion and effortless dynamic range.

The RW-5101-C utilizes a 10-inch long-throw woofer for unbeatable music and movie playback and high power handling (250 watts). The driver features a stiff, well-damped Cerametallic cone, a specially treated aluminum that has been electrochemically transformed into ceramic on both outer surfaces. This ceramic compound allows the woofer to move at high speeds without blurring the sound. Furthermore, the subwoofer features an MDF baffle and sealed back enclosure, allowing it to deliver consistent low-frequency response regardless of the ceiling space.

Easy-to-install, the RW-5101-C can accommodate new or existing ceiling structures, as the enclosure is designed to fit standard ceiling joists. It employs all-new sure-grip mounting dogs for even pressure against the drywall. These robust dogs pull tight, leaving no gaps in sight and providing long-term installation reliability.

Timbre and style matched to all of our other premium in-ceiling products, the RW-5101-C brings a great bottom-end to a wide variety of discreet stereo or home theater systems. In fact, we’ve got premium architectural solutions in all shapes, sizes and prices, so take your pick! 

 *The RW-5101-C must be used in conjunction with the company’s RSA-500 subwoofer amplifier, sold separately. Two of these subwoofers can be connected to a single amplifier.

The affordable Klipsch R-2800-C makes discrete audio a convincing reality for almost anyone. Upholding the same high-performance standards as all Klipsch products, this in-ceiling loudspeaker employs an 8-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter to deliver superior and seamless sound.

Available in a white finish, this speaker can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-5650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-5650-C features a 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch Cerametallic™ woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble and bass contour switches, give the CDT-5650-C an edge that will exceed your expectations.

Available in a white finish, the paintable CDT-5650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Designed to fit all Reference Series in-ceiling speakers with 8-inch woofers, the ME-800-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other. 

The ME-800-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards.

The ME-800-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-800-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

The R-1650-CSM employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity and strong bass output. Dual voice coils sum the low frequencies from a stereo input to mono. Upper frequencies are handled individually for the two channels by a coaxially mounted dual-tweeter array, preserving the stereo effect. 

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-CSM will fit into our latest IK-650-C installation kit, it can also be used in conjunction with the ME-650-C fire-rated enclosure.

Designed to fit all Reference Series in-ceiling speakers with 6.5-inch woofers (except for the square models), the ME-650-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

The R-1800-C employs an 8-inch polymer-cone woofer and a large motor structure for high sensitivity. A coaxially mounted 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1800-C will fit into our latest IK-800-C installation kit, it can also be used in conjunction with the ME-800-C fire-rated enclosure.

The R-1650-C employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity. A coaxially mounted 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-C will fit into our latest IK-650-C installation kit, it can also be used in conjunction with the ME-650-C fire-rated enclosure.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-3650-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-3650-C features a 1-inch aluminum tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 6.5-inch copper-colored IMG woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Because of its other professional grade features, such as a premium network and treble contour switch, the CDT-3650-C steers clear of the design shortcuts and sonic compromises that plague competing designs.

Available in a white finish, the paintable CDT-3650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-5800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-5800-C features a 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch Cerametallic™ woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble and bass contour switches, help the CDT-5800-C establish a new benchmark in architectural audio excellence.

Available in a white finish, the paintable CDT-5800-C can be paired with a Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology™ (CDT), both the high and low frequencies of the CDT-3800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-3800-C features a 1-inch aluminum tweeter mated to a swiveling 100-degree Tractrix® Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch copper-colored IMG woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble contour switch, give the CDT-3800-C an edge that will exceed your expectations.

Available in a white finish, the paintable CDT-3800-C can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Featuring the same drive components as its round counterpart, the two-way R-2650-C2 employs a 6.5-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter for superior depth and clarity.

Available in a white finish, the R-2650-C2 is paintable and can be paired with the Klipsch IK-650-C2 installation kit (sold separately). This kit design incorporates a mud ring, breakaway tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By adding the affordable R-2650-C2 to its high-end, easy-to-install architectural series, Klipsch proves it now has a speaker for every application and lifestyle

Offering the same technology and performance as the company's round in-ceiling speakers, the two-way R-5650-C2 features a light-weight, well-damped 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn as well as treble and bass contour switches for smooth and refined sound.

Because the swiveling horn allows installers to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area, creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5650-C2 is paintable and can be paired with the Klipsch IK-650-C2 installation kit (sold separately). This kit design incorporates a mud ring, breakaway tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By adding this square flush-mount speaker to its high-end, easy-to-install architectural series, Klipsch proves it now has a product for every application and lifestyle.

From multi-room sound to state-of-the-art home theater, Klipsch delivers exciting, high-value audio solutions for every application and lifestyle. And the Synergy Series KHW-5 in-wall loudspeaker helps make it possible. 

The KHW-5 is carefully engineered using the latest technology to deliver superb performance and unparalleled value. It employs a 5.25-inch IMG-cone woofer to create remarkably clean, rich bass and a 1-inch aluminum-dome compression driver tweeter mated to a 5-inch square 90º x 60º Klipsch Tractrix® Horn for high efficiency and extreme reliability.

Because the KHW-5 uses the same technology and design features as the other Synergy products, it is possible to combine this architectural model with the line's standalone speakers and still maintain sonic continuity.

A tweeter attenuation switch conveniently placed behind the grille helps tailor the speaker's output to the acoustics of its environment, and an IR punchout accepts standard infrared receivers. And the speaker's 8-ohm impedance is compatible with all amplifiers.

The KHW-5's white frame and rustproof, powder-coated aluminum grille can be painted to match any wall.

With its superior construction and high-performance components that challenge comparable freestanding speakers, the KHW-5 proves that architectural sound doesn't have to mean compromised sound.

The IK-802-W installation kit offers increased mounting flexibility for our THX® Ultra2 in-wall speakers and RW-5802 in-wall subwoofer.

This revolutionary kit design incorporates a color-coded mud ring for easy size identification, a breakaway wire tie and multi-position snap fit wings.

The metal wings easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

*This kit is NOT plenum rated.

This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification.

The kit also comes with perforated metal wings that easily fasten to the studs via screws, staples or nails. Ribbed for increased rigidity, these wings enable a kit to span up to 24 inches easily. Painted white for easy marking and placement, these metal wings will fold around the edge of the studs if necessary.

 *This kit is NOT plenum rated.

Because of its THX® Ultra2 certification, the KL-7800-THX works well with multi-channel movie and music presentations playing up to reference levels in rooms of 3,000 cubic feet or larger.

The KL-7800-THX is also capable of delivering the same high-output, low distortion signature sound as its traditional enclosure counterpart, the KL-525-THX. It employs an 8-inch aluminum woofer and a 1-inch titanium dome compression driver mated to a Tractrix® Horn. This advanced horn design dramatically increases efficiency and allows the speaker to produce more output using less energy.

Featuring an integrated back box enclosure, the KL-7800-THX's response is both predictable and repeatable. Because this enclosure fits easily within the loudspeaker's footprint, the KL-7800-THX can be installed into new or existing construction.

Combine this dynamic loudspeaker with Klipsch's KS-7800-THX in-wall surround, KW-120-THX subwoofer and KA-1000-THX subwoofer amplifier to create a variety of THX Ultra2 in-wall system configurations. The KL-7800-THX can also be mixed and matched with the Klipsch THX Ultra2 traditional box products.

Featuring a 6.5-inch copper-colored IMG woofer, 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as a treble contour switch, this affordable and dynamic in-wall speaker gives you plenty of bang for your buck. In fact, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-3650-W can be paired with the Klipsch IK-650-W installation kit (sold separately).This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Featuring an 8-inch copper-colored IMG woofer, a 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as a treble contour switch, this dynamic in-wall speaker gives you plenty of bang for your buck and brings high-quality entertainment into your home without taking up valuable floor space. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-3800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By featuring an 8-inch Cerametallic™ woofer cone, a 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The R-1650-W employs a 6.5-inch polymer-cone woofer and a large motor structure for high sensitivity and strong bass output. A 1-inch polymer-dome tweeter distributes smooth, clear highs over a wide area.

The speaker’s mounting system makes installation a breeze, while its paintable aluminum grille provides added rust protection in moisture-prone areas such as bathrooms, kitchens and saunas.

While the R-1650-W will fit into our latest IK-650-W installation kit, it can also be used in conjunction with the ME-650-W fire-rated enclosure.

By featuring a 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix® Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. In fact, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5650-W can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Designed to fit all Reference Series in-wall speakers with 6.5-inch woofers, the ME-650-W allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-W is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-W fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-W's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

Fitting standard 2- by 4-inch construction, the easy-to-install RW-5802 can accommodate any new or existing structure with a minimum 0.5-inch dry wall surface. Because it features an MDF baffle with a reinforced composite sealed enclosure, this high-powered, passive module subwoofer provides guaranteed performance and minimizes sound transfer into adjacent rooms.

The RW-5802 gets its deep-driving bass courtesy of dual 8-inch long-throw woofers. These exclusive drivers feature stiff, well-damped Cerametallic™ cones, a specially treated aluminum that has been anodized, or electrochemically transformed into ceramic on both outer surfaces. Second only to diamond in strength, this ceramic compound allows the woofers to move at high speeds without blurring the sound like conventional designs.

Designed to power the RW-5802, the RSA-500 amplifier will drive up to two subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for quick and easy installation.

*While the RW-5802 in-wall subwoofer and RSA-500 subwoofer amplifier are sold separately, they must be used in conjunction with one another. 
 

This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack.

To keep end users from inadvertently tampering with performance levels, the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system.

This exceptional speaker employs a 6.5-inch gray polymer woofer cone and 1-inch soft/silk dome tweeter to deliver mind-bending depth and clarity.

Available in a white finish, the R-2650-W can be paired with the Klipsch IK-650-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

For over 60 years, we’ve been about no-compromise audio performance and our rock speaker is no exception. Just listen and you’ll discover that it delivers an amazing, full-bodied bass response for its price range.

The AWR-650-SM is a true two-way design that employs a 6.5-inch dual voice coil polymer woofer and dual ¾-inch polymer dome tweeters. 

The speaker’s dual tweeter design allows it to play both left and right stereo signals with precision and clarity. Additionally, it can be wired for mono output in instances where several models are needed to bring smooth and even coverage to larger areas.    

Available in a granite, sandstone or red rock finish, the AWR-650-SM features a durable UV-resistant enclosure so you can enjoy clean, clear sound all season long.

Available in black or white, this paintable kit is both rugged and flexible. It comes with a pole mount plate, two adjustable metal straps and an adjustable arm mount. This unique mounting solution also allows installers to effortlessly modify the direction of the speaker, which is a must for outside applications.

Building on the success of our popular CA-SW-8T model, the new CA-800-TSW version features enhanced cosmetics, added mounting flexibility and even better performance.

The re-voiced CA-800-TSW shakes things up and delivers a deep, driving sound through an 8-inch, long excursion driver that has a high-temperature voice coil attached to an IMG cone that is light weight and offers excellent rigidity and water resistance.

Available in black or white, this model has a durable UV-resistant all-weather enclosure and internal multi-tap transformer that allows 70-volt, 100-volt or pass through 6 ohm operation. It also features a re-designed grille that stays securely fastened and incorporates a new paint formulation for increased weather resistance and years of maintenance-free protection regardless of the climate or environment.

The included heavy gauge zinc C-bracket provides added mounting strength. It attaches to the enclosure's integral "center-of-gravity balanced" threaded studs that are positioned inside the speaker and to the oversized knobs, ensuring positive position-lock.

The CA-800-TSW's improved input cup allows for easier drainage and the added 3/8"-16 threaded inserts for use with optional mounts offers better placement flexibility.

With its UV-resistant ABS enclosure and stainless steel grille and hardware, the KHO-7 is designed to perform consistently under the harshest of conditions.

The KHO-7 produces lifelike sound through its 5.25-inch poly cone woofer and a 1-inch silk dome compression driver tweeter loaded with an exclusive Klipsch 90º x 40º Tractrix® Horn. This advanced horn design dramatically increases efficiency and allows the loudspeaker to produce more output using less energy.

Available in a white finish, the paintable KHO-7 comes with a C-style mounting bracket and port plug, making installation quick and simple. And its 8-ohm impedance is compatible with all amplifiers.

When it comes to an all-weather loudspeaker no quality is more respected and more desired than durability so look no further than the KHO-7.

Featuring a 4-inch IMG woofer, 1-inch polymer tweeter mated to a square Tractrix® Horn, durable UV-resistant enclosure, non-corrosive grille, easy draining input cup, heavy gauge zinc C-bracket and 3/8"-16 threaded inserts, the AW-400 easily brings high-quality music entertainment to your patio, garden, terrace, balcony or pool side.

With its good looks, great performance value and installation flexibility, the AW-400 will change the way you think about architectural audio.

Featuring a 5-inch IMG woofer, 1-inch polymer tweeter mated to a square Tractrix® Horn, durable UV-resistant enclosure, non-corrosive grille, easy draining input cup, heavy gauge zinc C-bracket and 3/8"-16 threaded inserts, the AW-500 easily brings high-quality music entertainment to your patio, garden, terrace, balcony or pool side.

Because it nicely blends in with its surroundings and offers installation flexibility, this amazing performer is sure to be a homeowner favorite.

Featuring a 5.25-inch IMG woofer, 1-inch titanium dome tweeter mated to a square Tractrix® Horn, durable UV-resistant enclosure, non-corrosive grille, easy draining input cup, heavy gauge zinc C-bracket and 3/8"-16 threaded inserts, the AW-525 easily creates the ultimate outdoor sound experience.

Regardless of what Mother Nature throws its way, the AW-525 will continue to deliver big time sound and worry-free performances.

Available in white or black finish.

The Klipsch AW-650 all-weather loudspeaker was designed for customers who expect great sound in the great outdoors. Upholding the same high-quality standards as our indoor products, this full-range model delivers a level of performance that's like nothing you've heard in an outdoor speaker before.

Featuring a 6.5-inch IMG woofer, 1-inch titanium dome tweeter mated to a square Tractrix® Horn, durable UV-resistant enclosure, non-corrosive grille, easy draining input cup, heavy gauge zinc C-bracket and 3/8"-16 threaded inserts, the AW-650 can be mounted almost anywhere and still deliver clean, clear and dynamic performances. 

Available in white or black finish.

Upholding the same high-performance standards as all our indoor products, the AW-500-SM employs a 5-inch IMG woofer and dual 1-inch titanium dome tweeters so that it can play both left and right stereo signals with total precision and clarity.

Perfect for small outdoor areas that cannot accommodate multiple speakers, the AW-500-SM can also bring smooth and even coverage to larger areas when combined with several other identical models.

Other professional-grade features on the AW-500-SM include a switch that lets listeners easily select between mono and stereo configurations, durable UV-resistant enclosure, heavy gauge zinc C-bracket for added mounting strength and 3/8"-16 threaded inserts that fit popular third party mounts, making installation quick and simple. 

Because it nicely blends in with its surroundings and offers installation flexibility, this amazing performer is sure to be a homeowner favorite.

The R-2502-W employs dual 5.25-inch polymer woofer cones for accurate sound with dynamic detail, while a silk dome tweeter mated to a symmetrical pattern 90 x 90 conical horn generates flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor. IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers.
   
Furthermore, the R-2502-W offers unlimited flexibility. It is timbre matched to all of our 2000 series architectural products, so you can mix and match to create an affordable, discreet stereo or home theater system that’s just right for you.

Never before has Klipsch offered such premium performance in an in-wall speaker. You’ll discover it delivers effortless dynamic range and brings superior sound to larger rooms thanks to its highly regarded THX Select2 certification.  

The KL-6504-THX employs four high-output 5.25-inch fiberglass woofers for powerful bass impact, while a 1-inch titanium tweeter mated to a new symmetrical pattern 90 x 90 square Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. This exclusive horn design also allows the speaker to consistently deliver unbeatable sound, whether it’s installed horizontally or vertically.

The KL-6504-THX’s titanium horn-loaded tweeter is mated to the woofers using precision-voiced, high-definition crossover networks, creating high sensitivity. This makes the speaker easier to drive, so it requires a lot less amplification power than conventional designs.

Adding to its first-class sound, the KL-6504-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KL-6504-THX comes with a lot of options. It is timbre matched to all of our THX-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

The KL-6502-THX delivers effortless dynamic range and brings superior sound to larger areas thanks to its highly regarded THX Select2 certification.

It employs dual 5.25-inch woven fiberglass woofers for amazingly accurate sound, as well as a titanium tweeter mated to an exclusive Tractrix® Horn for flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.
   
Furthermore, the KL-6502-THX offers unlimited flexibility. It is timbre matched to all of our THX-certified products, so you can mix and match to create an unbeatable, discreet stereo or home theater system that’s just right for you.

As the smaller of the two LCR speakers in the Ultra2 family, the highly efficient KL-525-THX features a sealed enclosure, top-of-the-line internal wiring, dual 5.25-inch Cerametallic™ woofers and a 1-inch titanium diaphragm compression driver coupled to a 6- by 10-inch Tractrix® Horn.

The KL-525-THX enclosure has the same dado and rabbet construction used in Klipsch professional speakers ensuring cabinet integrity in suspended applications. The Omni-Mount suspension points on this loudspeaker facilitate wall or ceiling mounting using standard hardware.

Available in a custom Galaxy black finish with an aluminum fascia, the KL-525-THX delivers dynamic audio experiences that draw listeners into the middle of live concerts and action packed movies.

Our top-of-the-line in-ceiling LCR speaker, the KL-7502-THX uses highly respected certification, patented technology and premium materials to deliver compelling audio experiences that are second to none. In fact, most in-ceiling speakers can’t “fool” listeners into believing the sound is coming directly at them, rather than from above. But that’s not a problem for the KL-7502-THX, as it offers articulate detail, powerful impact and excellent localization.

The KL-7502-THX employs dual 5.25-inch Cerametallic woofers that operate in an enclosed tuned-port chamber. These exclusive woofer cones offer superb damping characteristics that will not flex or resonate at frequencies within the drivers’ operating ranges, resulting in consistent bass response regardless of the installation or ceiling air space.

A 1-inch titanium tweeter in a patented 60-90-110-degree horn that features Variable Coverage Technology, or VCT, allows the speaker to create precise imaging and localized sound fields.

Adding to its first-class sound, the KL-7502-THX also has a premium look and feel with its grille off, featuring a deluxe MDF baffle with aluminum fascia. But when covered, the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.

Furthermore, the KL-7502-THX comes with a lot of options. It is timbre matched to all of our THX Ultra2-certified products, so you can mix and match for the discreet stereo or home theater system that’s just right for you.

The R-5502-W employs dual 5.25-inch Cerametallic woofer cones for fast, accurate sound with dynamic detail, while a titanium tweeter mated to a pivoting Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. The speaker’s precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.   

This in-wall speaker also consistently delivers thrilling, realistic sound, whether it’s installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.

Bass and treble swi