The two-way IC-400-T features a 5-inch woofer, and 1-inch titanium diaphragm compression driver on a 2-inch round Tractrix® Horn for smooth response with constant directivity. A 1-inch Tractrix port design helps to provide deeper, fuller bass with less compression and distortion. A new, more compact design simplifies low ceiling mounting.

For distributed line applications, the IC-400-T features a 70/100 volt multi-tap transformer. A single rotary switch for the 8-ohm bypass and multi-tap setting is conveniently located under the speaker grille. The IC-400-T is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.

The two-way IC-525-T features a 5.75-inch woofer, and a titanium diaphragm compression driver on a 3.5-inch round modified XT Tractrix® Horn for smooth response with constant directivity. A 1-inch Tractrix port design helps to provide deeper, fuller bass with less compression and distortion, while a new, more compact design simplifies low ceiling mounting.

For distributed line applications, the IC-525-T features a 70/100 volt multi-tap transformer. A single rotary switch for the 8-ohm bypass and multi-tap setting is conveniently located under the speaker grille. The IC-525-T is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.

The two-way IC-650-T features a 6.5-inch woofer, and 1-inch titanium diaphragm compression driver on a 3.5-inch round modified XT Tractrix® Horn for smooth response with constant directivity. A 1-inch Tractrix port design helps to provide deeper, fuller bass with less compression and distortion. A new, more compact design simplifies low ceiling mounting.

For distributed line applications, the IC-650-T features a 70/100 volt multi-tap transformer. A single rotary switch for the 4-ohm bypass and multi-tap setting is conveniently located under the speaker grille. The IC-650-T is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.

Most distributed audio systems are plagued with thin-sounding performances, but the new IC-SW-8T2 in-ceiling subwoofer changes everything. Engineered for music reinforcement applications, these unobtrusive, easy-to-install loudspeakers feature a transformer-less design for 70V/100V distributed-line systems with two wattage settings. Since transformers severely limit a subwoofer's capabilities, this unique design is the perfect solution when building a great sounding commercial system.

The IC-SW-8T2 adds more dimension to any in-ceiling configuration by using an 8-inch woofer, 8-inch drone, polypropylene cones and high-temperature voice coils in the active driver. While most subwoofers use a port to increase output, the IC-SW-8T2 employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and removes turbulence that is often present in ported designs. Maximum continuous output is a remarkable 111dB. And since AES rated sensitivity is 92dB, adequate levels can be achieved with modest amplifier power using the IC-SW-8T2.

Other key features of the IC-SW-8T2 include the ability to easily switch from low impedance to high impedance distributed-line applications as well as mono and two-channel inputs in low impedance modes. This durable subwoofer has an ABS plastic baffle, formed steel back can and a four-point terminal strip input connector and is UL 2043 and 1480 certified. The IC-SW-8T2 is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 061347) is also available for drywall ceiling installations.

Most distributed audio systems are plagued with thin-sounding performances, but the new IC-8T-SW in-ceiling subwoofer changes everything. Engineered for music reinforcement applications, these unobtrusive, easy-to-install loudspeakers feature a transformer-less design for 70.7V/100V distributed-line systems. Since transformers severely limit a subwoofer's capabilities, this unique design is the perfect solution when building a great sounding commercial system. 

The IC-8T-SW adds more dimension to any in-ceiling configuration by using an 8-inch woofer, 8-inch drone, polypropylene cones and high-temperature voice coils in the woofer. While most subwoofers use a port to increase output, the IC-8T-SW employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and minimizes turbulence that is often present in ported designs. Maximum continuous output is a remarkable 111dB. And since AES rated sensitivity is 92dB, adequate levels can be achieved with modest amplifier power using the IC-8T-SW. 

Other key features of the IC-8T-SW include the ability to easily switch from low impedance to high impedance distributed-line applications as well as mono and two-channel inputs in low impedance modes. This durable subwoofer has an ABS plastic baffle, formed steel back can and a four-point terminal strip input connector. The IC-8T-SW is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 061347) is also available for drywall ceiling installations.

Building on the success of our popular CA-8T model, which has been used in a countless number of high-profile installations all over the U.S., the CA-800T version features enhanced cosmetics, added mounting flexibility and even better performance. For efficiency and reliability, the CA-800T has been re-voiced and employs a high-power, extended range low frequency driver. It features an 8-inch IMG cone woofer and 1-inch titanium dome tweeter coupled to a square-mouth 90-degree by 90-degree Tractrix® Horn, which allows the speaker to be mounted horizontally or vertically without affecting the coverage pattern. 

Available in black or white, this speaker has a durable UV-resistant all-weather enclosure that includes an internal multi-tap transformer with expanded range and a switchable direct 8-ohm bypass. The tap settings for the CA-800T at 70V are 60W, 30W, 15W, 7.5W and 3.7W. The added 3.7W tap setting offers further placement flexibility. The settings for 100V are 60W, 30W, 15W and 7.5W. The included heavy gauge zinc C-bracket provides added mounting strength. It attaches to the enclosure's integral "center-of-gravity balanced" threaded studs that are positioned inside the speaker and to the oversized knobs, ensuring positive position-lock. Connections are provided via four-position barrier strips. This allows an installer to use two connectors for inputs and two for pass-throughs, making it easier to daisy chain. 

The CA-800T's updated grille design stays securely fastened and incorporates a new paint formulation for increased weather resistance and years of maintenance-free protection regardless of the climate or environment. The speaker's improved input cup allows for easier drainage and the added 3/8"-16 threaded insert for use with optional mounts offers better placement flexibility.

Building on the success of our popular CA-6T model, the new CA-650T version features enhanced cosmetics, added mounting flexibility and even better performance.

For efficiency and reliability, the CA-650T has been re-voiced and employs a high-power, extended range low frequency driver. It features a 6.5-inch IMG cone woofer and 1-inch titanium dome tweeter coupled to a square-mouth 90-degree by 90-degree Tractrix® Horn, which allows the speaker to be mounted horizontally or vertically without affecting the coverage pattern.

Available in black or white, this speaker has a durable UV-resistant all-weather enclosure that includes an internal multi-tap transformer with expanded range and a switchable direct 8-ohm bypass. The tap settings for the CA-650T at 70V are 60W, 30W, 15W, 7.5W and 3.7W. The added 3.7W tap setting offers further placement flexibility. The settings for 100V are 60W, 30W, 15W and 7.5W.

The included heavy gauge zinc C-bracket provides added mounting strength. It attaches to the enclosure's integral "center-of-gravity balanced" threaded studs that are positioned inside the speaker and to the oversized knobs, ensuring positive position-lock. Connections are provided via four-position barrier strips. This allows an installer to use two connectors for inputs and two for pass-throughs, making it easier to daisy chain.

The CA-650T's updated grille design stays securely fastened and incorporates a new paint formulation for increased weather resistance and years of maintenance-free protection regardless of the climate or environment. The speaker's improved input cup allows for easier drainage and the added 3/8"-16 threaded insert for use with optional mounts offers better placement flexibility.

The two-way IC-6T features a swiveling Tractrix® Horn with aluminum dome compression driver, which allows contractors to direct the sound to specific areas more accurately than fixed position tweeter designs, minimizing disturbing sonic reflections even when the speaker is positioned in a less-than-optimal locaton. Other features include an injection-molded woofer cone, Santropene® surround, cast polymer woofer frame and screw-down terminals.

As a benefit for distributed line applications, the IC-6T features a 60-watt 70/100 volt multi-tap transformer. A single switch for the 8-ohm bypass and multi-tap setting is conveniently located on the front baffle. The IC-6T is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.

The two-way IC-5T features a swiveling Tractrix® Horn with aluminum dome compression driver, which allows contractors to direct the sound to specific areas more accurately than fixed position tweeter designs, minimizing disturbing sonic reflections even when the speaker is positioned in a less-than-optimal locaton. Other features include an injection-molded woofer cone, Santropene® surround, cast polymer woofer frame and screw-down terminals.

As a benefit for distributed line applications, the IC-5T features a 30-watt 70/100 volt multi-tap transformer. A single switch for the 16-ohm bypass and multi-tap setting is conveniently located on the front baffle. The IC-5T is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.

Specifically designed for the "CMS" or Commercial Music System, this advanced outboard network is housed in a UL-approved metal box and features 70V/100V tap-settings and serves as a hub for up to four commercial satellites and either a Klipsch IC-SW-8T flush mount or CA-800-TSW surface mount subwoofer.

A typical CMS 4.1 consists of four low-profile satellites, four satellite mounts, one network and either an in-ceiling or surface mount subwoofer. Because these components are sold separately, you can easily add to the system and bring just the right amount of sound to any size installation.

Available in black or white, the satellite is a marvel of miniature technology that maximizes output and dynamics. Klipsch's exclusive MicroTractrix™ Horn, the working element of this 7.5-inch tall loudspeaker is formed right into the cabinet baffle, a design that offers the lowest diffraction and maximum release of energy into the listening areas. The ported, bass-reflex enclosure maximizes bass response for a dynamic sound.

Also available in black or white, the mounting kit features a metal wall plate and a metal arm with a tip that offers both tilt and swivel features. Once properly positioned, the tip can easily be locked into place with the provided adjustment tool. Because of its hollowness, the arm also conceals the satellite's color-matched wire for a clean, professional appearance.

As one of the subwoofer options, the compact CA-800-TSW is an all-purpose, indoor/outdoor passive model with an internal multi-tap transformer. This product delivers deep, driving sound through an 8-inch, long excursion driver that has a high-temperature voice coil attached to an IMG (injection-molded graphite) cone that combines light weight, excellent rigidity, and water resistance. For easy wall or ceiling mounting, the CA-800-TSW comes with a heavy gauge zinc C-bracket assembly that attaches to threaded studs in the cabinet with oversized knobs, ensuring positive lock. An optional safety retainer allows for connection to a second mounting point, guarding against dislodging or tampering.

Also compact, the IC-8T-SW in-ceiling subwoofer option features a transformer-less design that delivers high-impact, robust bass. This model adds more dimension to any in-ceiling configuration by using an 8-inch woofer, 8-inch drone, polypropylene cones and high-temperature voice coils in the woofer. While most subwoofers use a port to increase output, the IC-8T-SW employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and minimizes turbulence that is often present in ported designs. The IC-8T-SW is shipped complete with a tilebridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.

Specifically designed for this system, the UL-approved metal box outboard network features 70V/100V tap-settings and serves as a hub for up to four satellites and the chosen subwoofer.

Building on the success of our popular CA-5T model, the new CA-525T version features enhanced cosmetics, added mounting flexibility and even better performance.

For efficiency and reliability, the CA-525T has been re-voiced and employs a high-power, extended range low frequency driver. It features a 5.25-inch IMG cone woofer and 1-inch titanium dome tweeter coupled to a square-mouth 90-degree by 90-degree Tractrix® Horn, which allows the speaker to be mounted horizontally or vertically without affecting the coverage pattern.

Available in black or white, this speaker has a durable UV-resistant all-weather enclosure that includes an internal multi-tap transformer with expanded range and a switchable direct 8-ohm bypass. The tap settings for the CA-525T at 70V are 30W, 15W, 7.5W, 3.7W and 1.8W. The added 1.8W tap setting offers further placement flexibility. The settings for 100V are 30W, 15W, 7.5W and 3.7W.

The included heavy gauge zinc C-bracket provides added mounting strength. It attaches to the enclosure's integral "center-of-gravity balanced" threaded studs that are positioned inside the speaker and to the oversized knobs, ensuring positive position-lock. Connections are provided via four-position barrier strips. This allows an installer to use two connectors for inputs and two for pass-throughs, making it easier to daisy chain.

The CA-525T's updated grille design stays securely fastened and incorporates a new paint formulation for increased weather resistance and years of maintenance-free protection regardless of the climate or environment. The speaker's improved input cup allows for easier drainage and the added 3/8"-16 threaded insert for use with optional mounts offers better placement flexibility.

Designed with operational convenience and versatility in mind, this low-profile 7.5-inch tall satellite combines performance, style and functionality for businesses that are seeking dynamic sound and an elegant appearance, but require small, unobtrusive speakers for their environments.

Available in black or white, the smoothly shaped satellite is a marvel of miniature technology that maximizes output and dynamics. This two-way, magnetically shielded speaker employs a 3.5-inch poly cone woofer and uses a 0.75-inch polymer dome compression driver coupled to Klipsch's exclusive MicroTractrix™ Horn. The horn is formed right into the cabinet baffle offering the lowest diffraction and maximum release of energy into the listening area. The rear ported, bass-reflex enclosure maximizes bass response for a clean and seamless sound.

With high-performance, high-style speakers that include the commercial satellite, Klipsch has raised the bar for quality sound in the commercial marketplace and proven you don't have to trade off great performance for style and convenience.

Building on the success of our popular CA-SW-8T model, the new CA-800-TSW version features enhanced cosmetics, added mounting flexibility and even better performance.

The re-voiced CA-800-TSW shakes things up and delivers a deep, driving sound through an 8-inch, long excursion driver that has a high-temperature voice coil attached to an IMG cone that is light weight and offers excellent rigidity and water resistance.

Available in black or white, this model has a durable UV-resistant all-weather enclosure and internal multi-tap transformer that allows 70-volt, 100-volt or pass through 6 ohm operation. It also features a re-designed grille that stays securely fastened and incorporates a new paint formulation for increased weather resistance and years of maintenance-free protection regardless of the climate or environment.

The included heavy gauge zinc C-bracket provides added mounting strength. It attaches to the enclosure's integral "center-of-gravity balanced" threaded studs that are positioned inside the speaker and to the oversized knobs, ensuring positive position-lock.

The CA-800-TSW's improved input cup allows for easier drainage and the added 3/8"-16 threaded inserts for use with optional mounts offers better placement flexibility.

Designed to fit all Reference Series in-ceiling speakers with 6.5-inch woofers (except for the square models), the ME-650-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

Designed to fit all Reference Series in-ceiling speakers with 8-inch woofers, the ME-800-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other. 

The ME-800-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards.

The ME-800-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-800-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

Designed to fit all Reference Series in-wall speakers with 6.5-inch woofers, the ME-650-W allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-W is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards. 

The ME-650-W fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for most installation applications, and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-W's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

Available in black or white, this paintable kit is both rugged and flexible. It comes with a pole mount plate, two adjustable metal straps and an adjustable arm mount. This unique mounting solution also allows installers to effortlessly modify the direction of the speaker, which is a must for outside applications.

In order to make the "CMS" or Commercial Music System installation a breeze, Klipsch offers durable mounting kits for its compact, high-performance commercial satellites.

Also available in black or white, the mounting kit features a metal wall plate and a metal arm with a tip that offers both tilt and swivel features. Once properly positioned, the tip can easily be locked into place with the provided adjustment tool. To enhance the cosmetics of the finished installation, the mounting arm is hollow, to allow concealment of the satellite's color-matched wire.