Taking full advantage of recent advancements in materials technology, the CS-650-R incorporates polymer cones for improved performance and reliability and rubber surrounds for added durability. The larger magnets increase efficiency and sensitivity and the powder-coated aluminum grilles will never rust.

The Synergy Series SCR-2 in-ceiling speaker provides great Klipsch sound, easy installation and outstanding reliability, making it one of the best values available in architectural audio.

The SCR-2 is a two-way speaker that employs a 6.5-inch IMG woofer and a 1-inch aluminum dome Tractrix® Horn tweeter. The 360-degree rotating horn lets you point the sound at the listening area just like a traditional enclosure loudspeaker. A -3dB tweeter attenuation switch gives you better sound control and is conveniently located just behind the grille.

While it looks very different, the SCR-2's drivers sonically match all Synergy Series models, delivering the same wide dynamic, low distortion performance.

Offering the same technology and performance as the company's round in-ceiling speakers, the two-way R-5650-C2 features a light-weight, well-damped 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix® Horn as well as treble and bass contour switches for smooth and refined sound.

Because the swiveling horn allows installers to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area, creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5650-C2 is paintable and can be paired with the Klipsch IK-650-C2 installation kit (sold separately). This kit design incorporates a mud ring, breakaway tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By adding this square flush-mount speaker to its high-end, easy-to-install architectural series, Klipsch proves it now has a product for every application and lifestyle.

Taking full advantage of recent advancements in materials technology, the CS-800-R incorporates polymer cones for improved performance and reliability and rubber surrounds for added durability. The larger magnets increase efficiency and sensitivity and the powder-coated aluminum grilles will never rust.

Built from the inside out for performance and durability, the IC-8T-SW packs a lot of substance into commercial sound system.

Most distributed audio systems are plagued with thin-sounding performances, but the new IC-8T-SW in-ceiling subwoofer changes everything. Engineered for music reinforcement applications, these unobtrusive, easy-to-install loudspeakers feature a transformer-less design for 70.7V/100V distributed-line systems. Since transformers severely limit a subwoofer's capabilities, this unique design is the perfect solution when building a great sounding commercial system. 

The IC-8T-SW adds more dimension to any in-ceiling configuration by using an 8-inch woofer, 8-inch drone, polypropylene cones and high-temperature voice coils in the woofer. While most subwoofers use a port to increase output, the IC-8T-SW employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and minimizes turbulence that is often present in ported designs. Maximum continuous output is a remarkable 111dB. And since AES rated sensitivity is 92dB, adequate levels can be achieved with modest amplifier power using the IC-8T-SW. 

Other key features of the IC-8T-SW include the ability to easily switch from low impedance to high impedance distributed-line applications as well as mono and two-channel inputs in low impedance modes. This durable subwoofer has an ABS plastic baffle, formed steel back can and a four-point terminal strip input connector. The IC-8T-SW is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 061347) is also available for drywall ceiling installations.

Creating a new benchmark in architectural audio excellence, the Klipsch R-5650-C in-ceiling loudspeaker brings powerful and detailed sound into your home without taking up valuable floor space. Whether it's used for home theater or stereo music applications, this model won't disappoint.

Featuring a 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a swiveling 100-degree asymetrical Tractrix® Horn, as well as treble and bass contour switches, the R-5650-C delivers unbeatable precision, clarity and efficiency. In fact, because the swiveling horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

By incorporating a proprietary two-screw frame design, the R-5650-C is also one of the most easy-to-install products on the market. With this "one trip up the ladder" concept, installers only have to tighten two screws in order to securely mount the loudspeaker into the ceiling.

Available in a white finish, the R-5650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The R-3800-C in-ceiling loudspeaker delivers superior audio performance while effortlessly integrating into almost any lifestyle. It was designed to deliver all the gusto you'd expect from Klipsch without taking up valuable floor space.

Featuring an 8-inch copper-colored IMG woofer, a 1-inch aluminum tweeter mated to a swiveling 100-degree asymetrical Tractrix® Horn, as well as a treble contour switch, this affordable and high-performance in-ceiling speaker gives you plenty of bang for your buck. In fact, because the swiveling horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

By incorporating a proprietary two-screw frame design, the R-3800-C is also one of the most easy-to-install products on the market. With this "one trip up the ladder" concept, installers only have to tighten two screws in order to securely mount the loudspeaker into the ceiling.

Available in a white finish, the R-3800-C can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Offering incredible audio performance at an extremely competitive price point, the installer-friendly Klipsch R-3650-C in-ceiling loudspeaker brings high-quality entertainment into your home without taking up valuable floor space.

Featuring a 6.5-inch copper-colored IMG woofer, 1-inch aluminum tweeter mated to a swiveling 100-degree asymetrical Tractrix® Horn, as well as a treble contour switch, this dynamic in-ceiling speaker delivers all the gusto you'd expect from Klipsch. In fact, because the swiveling horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

By incorporating a proprietary two-screw frame design, the R-3650-C is also one of the most easy-to-install products on the market. With this "one trip up the ladder" concept, installers only have to tighten two screws in order to securely mount the loudspeaker into the ceiling.

Available in a white finish, the R-3650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Discrete but not understated, the Klipsch R-5800-C in-ceiling loudspeaker significantly enhances the audio performance inside your home without cluttering it. Perfect for home theater or stereo music applications, this dynamic and installer-friendly model integrates nicely into almost any lifestyle.

Featuring an 8-inch Cerametallic™ woofer cone, a 1-inch titanium tweeter mated to a swiveling 100-degree asymetrical Tractrix® Horn, as well as treble and bass contour switches, the R-5800-C establishes a new benchmark in architectural audio excellence. In fact, because the swiveling horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

By incorporating a proprietary two-screw frame design, the R-5800-C is also one of the most easy-to-install products on the market. With this "one trip up the ladder" concept, installers only have to tighten two screws in order to securely mount the loudspeaker into the ceiling.

Available in a white finish, the R-5800-C can be paired with the Klipsch IK-800-C installation kit (sold separately).This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The Synergy Custom Series SCR-1 in-ceiling loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the SCR-1 is still owned and listened to by Klipsch fans around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Synergy Custom Series SCR-3 in-ceiling loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the SCR-3 is still owned and listened to by Klipsch fans around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

Featuring the same drive components as its round counterpart, the two-way R-2650-C2 employs a 6.5-inch gray polymer woofer cone and a 1-inch soft/silk dome tweeter for superior depth and clarity.

Available in a white finish, the R-2650-C2 is paintable and can be paired with the Klipsch IK-650-C2 installation kit (sold separately). This kit design incorporates a mud ring, breakaway tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

By adding the affordable R-2650-C2 to its high-end, easy-to-install architectural series, Klipsch proves it now has a speaker for every application and lifestyle

Taking full advantage of recent advancements in materials technology, the CS-650-RSM incorporates polymer cones for improved performance and reliability and rubber surrounds for added durability. The larger magnets increase efficiency and sensitivity and the powder-coated aluminum grilles will never rust.

The Reference Series RCR-5 in-ceiling loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the RCR-5 is still owned and listened to in homes around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Reference Series RCR-3 in-ceiling loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the RCR-3 is still owned and listened to in homes all around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Synergy Custom Series SCW-1 in-wall loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the SCW-1 is still owned and listened to by Klipsch fans around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Synergy Series SCW-2 in-wall speaker provides great sound, easy installation and outstanding reliability, making it one of the best values available in architectural audio.

The SCW-2 is a two-way speaker that employs a 6.5-inch IMG woofer and a 1-inch aluminum dome Tractrix® Horn tweeter. The proprietary pivoting square horn delivers wide dynamics, low distortion and the highest levels of power and output available whether part of a home theater or distributed sound system.

The SCW-2's -3dB tweeter attenuation switch gives you better sound control, but is neatly concealed just behind the form-fitting grille, which may be painted.

The Synergy Custom Series SCW-3 in-wall loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the SCW-3 is still owned and listened to by Klipsch fans around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The CS-652-W's copper colored 6.5-inch IMG-cone woofer has a durable rubber surround and a large motor structure for high sensitivity and strong bass output. A 1-inch aluminum-dome tweeter distributes smooth, clear highs over a wide area.

Modestly priced and easy to install, the CS-652-W provides good sound wherever you want it - without making a spectacle of itself. It suits a broad range of applications requiring inconspicuous loudspeakers.

The CS-652-W's rugged ABS frame and powder-coated aluminum grille ensure long, trouble-free operation. And the speaker's 8-ohm impedance is compatible with all amplifiers. The white frame and grille can be painted to match the wall.

The Reference Series RCW-3 in-wall loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the RCW-3 is still owned and listened to in homes around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Reference Series RCW-5 in-wall loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the RCW-5 is still owned and listened to in homes around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

Taking full advantage of recent advancements in materials technology, the CS-650 W incorporates polymer cones for improved performance and reliability and rubber surrounds for added durability. The larger magnets increase efficiency and sensitivity and the powder-coated aluminum grilles will never rust.