In-Ceiling

IC-400-T

IC-400-T

5-INCH TWO-WAY IN-CEILING LOUDSPEAKER

Many of the world's most recognized brands including Ron Jon Surf Shop and Bloomingdale's use our commercial speakers to create unique memorable experiences for their customers. Do the same for your business with the IC-400-T our smallest 70-volt in-ceiling speaker.

  • Easy to install and adjust settings
  • Compact design simplifies low-ceiling mounting
  • Deep bass with less compression
  • Horn-loaded for clear sound in any location
  • Multi-tap transformer for distributed audio
  • Includes tile bridge for installation in any ceiling
  • Pairs well with our CA surface mount speakers
  • Works with Klipsch KPH-525 Pendant Housing for high/no suspended ceiling installs
IC-500-T-SC

IC-500-T-SC

At just over 4” deep, the all-new IC-500-T-SC packs proven materials and wide dispersion horn technology into an installer-friendly, UL-2043 and UL-1480 certified in-ceiling loudspeaker with an integrated back can and multi-tap transformer.

  • Shallow 4.125” depth
  • Includes 15 watt 70/100 volt multitap transformer
  • 70V, 100V, or 8 ohm operation selectable via front baffle switch.
  • Tractrix port design for deep bass with less compression
  • Tractrix horn tweeter for smooth on and off axis performance
  • Designed to mix and match with Klipsch CA speakers
  • Includes grille, backcan, tile-bridge, and cut-out template for easy installation
IC-525-T

IC-525-T

5.25-INCH TWO-WAY IN-CEILING LOUDSPEAKER

Many of the world's most recognized brands including Ron Jon Surf Shop and Bloomingdale's use our commercial speakers to create unique memorable experiences for their customers. Do the same for your business with our intermediate IC-525-T 70-volt speaker.

  • Easy to install and adjust settings
  • Compact design simplifies low-ceiling mounting
  • Deep bass with less compression
  • Horn-loaded for clear sound in any location
  • Multi-tap transformer for distributed audio
  • Includes tile bridge for installation in any ceiling
  • Pairs well with our CA surface mount speakers
  • Works with Klipsch KPH-525 Pendant Housing for high/no suspended ceiling installs
IC-650-T

IC-650-T

6.5-INCH TWO-WAY IN-CEILING LOUDSPEAKER

Many of the world's most recognized brands including Ron Jon Surf Shop and Bloomingdale's use our commercial speakers to create unique memorable experiences for their customers. Do the same for your business with our top-of-the-line IC-650-T 70-volt speaker.

  • Easy to install and adjust settings
  • Compact design simplifies low-ceiling mounting
  • Deep bass with less compression
  • Horn-loaded for clear sound in any location
  • Multi-tap transformer for distributed audio
  • Includes tile bridge for installation in any ceiling
  • Pairs well with our CA surface mount speakers
KPH-650

KPH-650

Designed exclusively to easily fit the Klipsch IC-650-T In-Ceiling 70/100 Volt Commercial speaker, the KPH-650 now brings the benefits of efficiency and sonic clarity of the Klipsch IC speaker series to an aesthetic, suspended pendant design perfect for distributed sound in higher-ceiling structures.

IC-800-T

IC-800-T

The IC-800-T packs proven materials and Tractrix® horn technology into a high performance, install friendly, UL-2043 & 1480 certified loudspeaker with an integrated backcan. For distributed applications, the IC-800-T features a 70/100 volt, 100 watt, multi-tap transformer. A single rotary switch for the 8-ohm bypass and multi-tap settings is conveniently located under the speaker grille.

  • Tight 75 degree coverage pattern for high ceiling applications
  • 100 watt, low insertion loss, multitap transformer for high output and less compression
  • 70-volt, 100-volt or low impedance operation selectable via a front baffle switch
  • Tractrix port design for deep bass with improved linear response
  • Excellent low-frequency performance for applications where low-frequency bass extension is required
  • Designed to mix & match with Klipsch CA-T speakers
IC-SW-8T2

IC-SW-8T2

DUAL 8-INCH IN-CEILING PASSIVE SUBWOOFER

Built from the inside out for performance and durability the IC-SW-8T2 packs a lot of substance into commercial sound system.

  • High sensitivity and power handling
  • Extended powerful bass
  • Very high output capability
  • Transformerless 70V/100V w/ 2 wattage settings single-input 4-ohm or dual-input 8-ohm operation
  • ABS baffle with removable paintable powder-coated aluminum grille
  • UL approved for 1480/2043
KPH-800

KPH-800

Designed exclusively to easily fit either the Klipsch IC-800-T or IC-SW-8T2 In-Ceiling 70/100 Volt Commercial speaker, the KPH-800 now brings the benefits of efficiency and sonic clarity of the Klipsch IC speaker series to an aesthetic, suspended pendant design perfect for distributed sound in higher-ceiling structures.

IC-400/525-T

IC-400/525-T

For use with our IC-400-T and IC-525-T in-ceiling speakers

  • Simplifies drywall installations
  • Heavy-duty pre-construction design
  • Each kit includes six rings
  • Part # 1010413

This optional mud ring kit offers increased mounting flexibility for our IC-400-T and IC-525-T 70-volt in-ceiling speakers when used in drywall applications. These pre-construction brackets are made of durable powder-coated 20 gauge steel making them suitable for plenum spaces. They attach to the ceiling joists prior to Sheetrock® installation and simplify speaker placement. 

IC-650-T

IC-650-T

For use with our IC-650-T in-ceiling speaker

  • Simplifies drywall installations
  • Heavy-duty pre-construction design
  • Each kit includes six rings
  • Part #1010414

This optional mud ring kit offers increased mounting flexibility for our IC-650-T 70-volt in-ceiling speaker when used in drywall applications. These pre-construction brackets are made of durable powder-coated 20 gauge steel making them suitable for plenum spaces. They attach to the ceiling joists prior to Sheetrock® installation and simplify speaker placement.  

IC-8T-SW

IC-8T-SW

For use with our IC-SW-8T2 in-ceiling subwoofer

  • Simplifies drywall installations
  • Heavy-duty pre-construction design
  • Each kit includes one ring
  • Part # 061347

The IC-8T-SW Mud Ring kit is designed to make the installation of our commercial ICSW-8T2 in-ceiling subwoofer easier and less time consuming when used in applications featuring a drywall ceiling. Constructed of durable Zinc plated 20 gauge steel these pre-construction brackets are suitable for use in plenum spaces. They attach to the ceiling joists ahead of the sheet rock installation and define where the loudspeaker through hole must be cut by the ceiling contractor.

Part # 061347 is sold singly packaged in individual cartons.