Cinema

Behind the Screen Systems

Subwoofers

KPT-1802-HLS

KPT-1802-HLS

The Klipsch KPT-1802-HLS cinema subwoofer uses a patented, horn-loaded vented cabinet design with an 18” driver, resulting in class-leading acoustic output combined with commanding sub-20Hz bass response previously unattainable from even a 21” driver configuration system. 

  • An industry-first horn-loaded vented cabinet design
  • High-efficiency with very low distortion perfectly complements today’s digital sound formats
  • 130dB continuous output capability
KPT-884-SW

KPT-884-SW

The KPT-884-SW is a high output bass-reflex cinema subwoofer that features an advanced low-frequency 4-inch voice coil driver design. Less than 23 inches in depth this system utilizes a single 18-inch driver that gains its high efficiency through the use of large geometrically optimized structures and light-weight cones. In fact the KPT-884-SW is capable of delivering an earth-shaking low frequency of 18Hz.

  • Advanced low-frequency 4-inch voice coil driver design
  • 18-inch driver
  • Light-weight cones
KPT-418-SW

KPT-418-SW

The KPT-418-SW is a high-output bass-reflex subwoofer system delivers true bottom-end performance along with high power handling capability and high efficiency.

KPT-684-SW

KPT-684-SW

The KPT-684-SW is a high output bass-reflex subwoofer featuring advanced low-frequency driver design.

  • Two 18-inch drivers
  • THX®-Approved

Surrounds

Parts and Upgrades

KPT-305

KPT-305

Single 8-inch Tractrix® Horn-loaded mid-bass device

The KPT-305 is utilized as a mid-bass device in the 4-way fully horn-loaded KPT-MCM-4-Grand and the KPT-745. It augments the low frequency sections of these speaker systems for effortless, distortion free bass in large auditoriums. It replaces the former KPT-XII.

SB-7 Mounting Bracket

SB-7 Mounting Bracket

The Klipsch SB-7 mounting bracket is designed to operate with all Klipsch Cinema Surround speakers with a 2.75” (6.9cm) by 5” (12.7cm) 4-bolt pattern. Vertical tilt angle plus or minus 15°, in 5° increment

Horizontal swivel option plus or minus 45° continuous, right or left of center.

SB-6 Mounting Bracket

SB-6 Mounting Bracket

The Klipsch SB-6 mounting bracket is designed to operate with all Klipsch Cinema Surround speakers with a 2.75” (6.9cm) by 5” (12.7cm) 4-bolt pattern.

Vertical tilt angle choices are 0° or 15° downward.